| FinePix
IS Pro Firmware (camera control software) Update Ver.1.03 |
| 5. Error
messages and responses |
| Error
Message |
Cause |
Response |
 |
There
is no memory card in the camera. |
Load
the memory card containing the firmware upgrade into the camera. |
 |
The
camera cannot read the memory card because it is not formatted. |
Reformat
the memory card and then copy the firmware upgrade onto the card again. |
 |
The
camera cannot read the memory card. |
There
may be a fault with the card or camera. Consult an authorized FUJIFILM service
facility. |
 |
The
memory card loaded in the camera does not contain the firmware upgrade. |
Copy
the firmware upgrade onto the card and then reload it into the camera. |
 |
The
camera cannot read the firmware upgrade file on the memory card. |
Download
the firmware upgrade again, copy it onto the memory card again and then load
the card into the camera. |
 |
The
firmware upgrade on the memory card is no newer than the firmware currently
on the camera. |
The
currently installed firmware is the latest version, so no firmware upgrade is
required. |
 |
The
firmware upgrade on the memory card is not for this camera. |
Download
the correct firmware upgrade for your camera model, copy it onto the memory card and then load the card into the camera. |
 |
The battery is not charged enough. |
Charge up the battery fully. |
 |
The
AC adapter is not connected. |
Connect
the AC adapter before upgrading the firmware. |
 |
Firmware
upgrading was not completed successfully for some reason. |
Request
repairs at an authorized FUJIFILM service facility. |
|
|
|
Global