| FinePix J100 Firmware Update Ver.1.01 |
| Troubleshooting (Error messages and responses) |
| Error
Message |
Cause |
Response |
 |
There is no memory card in the camera. |
Load
the memory card containing the firmware upgrade into the camera. |
 |
The
camera cannot read the memory card because it is not formatted. |
Reformat
the memory card and then copy the firmware upgrade onto the card again. |
 |
The
camera cannot read the memory card. |
There may be a fault with the memory card or camera.Consult an authorized FUJIFILM service facility. |
 |
The memory card loaded in the camera does not contain the firmware upgrade. |
Copy the firmware upgrade onto the memory card and then reload it into the camera. |
 |
The
camera cannot read the firmware upgrade file on the memory card. |
Download
the firmware upgrade again, copy it onto the memory card again and then load
the card into the camera. |
 |
The
firmware upgrade on the memory card is no newer than the firmware currently
on the camera. |
The
currently installed firmware is the latest version, so no firmware upgrade is
required. |
 |
The
firmware upgrade on the memory card is not for this camera. |
Download
the correct firmware upgrade for your camera model, copy it onto the memory card and then load the card into the camera. |
 |
The
AC adapter is not connected, or battery is not fully charged. |
Connect the AC adapter before upgrading the firmware, or ensure the battery is fully charged. |
 |
Firmware
upgrading was not completed successfully for some reason. |
Request
repairs at an authorized FUJIFILM service facility. |
|
|
|
Global