X Series

FUJIFILM X100T

Feature 3Beauty beyond the specification

Large APS-C X-Trans™* CMOS II Sensor

X-Trans CMOS II Sensor

OLPF-less architecture and the original pixel array are the keys to resolution rivaling a full-size sensor. Also the unique integration of phase detection pixels in the array contributes to the dramatic leap in AF speed.

Maximizing the power of APS-C-sized X-Trans CMOS II sensor
  • APS-C Image Sensor
    23.6 x 15.6mm
  • Micro Four Thirds
    17 x 13mm
  • 1-inch
    13.2 x 8.8mm

Leading the way to the ultimate image quality.
APS-C 16M X-Trans CMOS II Sensor & EXR Processor II

The extreme resolution of FUJIFILM's bespoke APS-C 16M X-Trans CMOS II sensor with OLPF-less architecture. The clarity of the signal achieved by the optimization of every aspect of its processing circuitry. The enhanced image quality produced by the powerful EXR Processor II.

  • 1: Microlenses
  • 2: X-Trans Color Filter
  • 3: L/R Light Interception Filter
  • 4: Phase Detection Sensor / Green Filter Pixel
  • 5: Photodiode

Advanced technology transfers the power of the lens into true-to-life photos.

X-Trans CMOS II incorporates an original color filter array with a highly random pattern, eliminating the need for an optical low-pass filter (OLPF). These filters are used in conventional systems to inhibit moiré at the expense of resolution. The X-Trans CMOS II array lets the sensor capture unfiltered light from the lens, achieving an unprecedented level of resolution.
In addition, utilizing the enhanced performance of the EXR Processor II, Lens Modulation Optimizer (LMO) factors are calculated to compensate for aberrations and diffraction blur that occur when light passes through the lens and then are applied to produce images with amazing sharpness.

[left]Conventional sensor  [center]New sensor (OLPF less) / New processor (LMO processing) [right]New Processor (PSFD Processing)
  • Conventional Digital Camera
  • Sensor (OLPF less) / Pprocessor (LMO processing)
  • FUJIFILM X100T
Resolution Comparison

Vertical axis : MTF (Resolution)
Horizontal axis : Ip/mm (Spatial frequency)

Setting standards in low noise performance
X-Trans CMOS II Sensor & EXR Processor II

In the X-Trans CMOS II sensor, the optimized circuits elevate the S/N ratio and produce a clean signal that is enhanced by the powerful EXR Processor II for a further increase in image quality. The original signal processing of the X-Trans array featuring advanced noise separation technology combines with a newly developed noise reduction process that exploits the color differential to suppress chromatic blur, resulting in image quality far beyond its sensor size.

High Sensitivity Performance Comparison

Vertical axis : S/N (dB)
Horizontal axis : ISO

EXR Processor II

The image processing power of the EXR Processor II not only produces images with increased resolution and higher quality at higher speeds, but also accelerates operational responses.

High-Speed Continuous Shooting

Maximum High-Speed Continuous Shooting Speed of 6.0fps (max. 25 frames*4) Shoot at a maximum burst speed of 6 frames per second at full 16-megapixel resolution to capture a series of exposures of moving subjects and other challenging photographic scenes and later select the best shot.

High Performance Mode

From instantaneous autofocusing in as fast as 0.08 sec**. to faster start-up, you can maximize the performance of the FUJIFILM X100T to its limits. Also after turning OFF the power, the FUJIFILM X100T enters a “sleep” mode (for a maximum of 20 minutes). Turn ON the power during this time, and the FUJIFILM X100T “wakes up” instantly, reducing the normal start-up time from about 0.9 sec. to approx. 0.5 sec. ready for you to frame and capture the moment.

Notes

  • · Sample photos are simulated images.
  • * X-Trans is a trademark or registered trademark of FUJIFILM Corporation.
  • ** Based on CIPA guidelines and conducted in "High Performance" mode.
  • *** High Performance Mode.
  • *4 Max. number of frames can be shot in JPEG setting.