Luxel T-9800CTP HD-S

The Luxel T-9800CTP HD-S is an external drum platesetter that features cutting-edge CTP technology and a next generation imaging system incorporating a 512-channel exposure head, developed with the aid of GLV™ (Grating Light Valve™) technology. It offers high-precision output and superior productivity.


  • Large 950 mm × 1,165 mm 8-up format
  • Hiring a new optical technology; GLV™ (Grating Light Valve™), “Luxel T-9800CTP HD-S” realized a superb 512-channel Multi-Exposure system and enhances ultimate productivity in thermal plate setter
  • 43 plates per hour at 2400 dpi
  • Four resolution levels from 1,200 to 2,540 dpi
  • Optional punch block configuration for a variety of plate sizes and press configurations
  • The “Luxel T-9000ML HD” multi-cassette autoloader enables to hold up to 5 cassettes (100 plates/cassette) and realizes efficient and high productivity


Recording system External drum
Media Fujifilm’s positive and negative thermal plates
Plate size Maximum : 1165 × 950 mm
Minimum : 304 × 305 mm
(The plate from 590 to less than 610mm in width cannot be used.)
Exposure size Maximum : 1165 × 938 mm
(Leading edge clamp : 6mm, Trailing edge clamp : 6mm)
Plate thickness 0.15 to 0.3 mm (0.4 mm also available with field option) *1
Light source 512ch GLV + 60 W BarLD × 1 808 nm
Resolution 1200 / 2400 / 2438 / 2540 dpi
* 1200 dpi is double dot of 2400 dpi.
* 4000 dpi is factory option and includes Lenticular output.
Productivity 43 pph at 2400 dpi (1030 × 800 mm)
Drum rotational speed Maximum : 230 rpm
Dynamic auto focus Standard
RIP interface S-PIF
Plate transport Autoloader connection type is a standard
Punch Maximum 12 units, Center position punch (Special order *2) *3
External Dimensions Recorder unit : 2,640(W) × 1,475(D) × 1,394(H) mm
* Blower system in the main unit.
Chiller unit : 350(W) × 720(D) × 720(H) mm
Weight Recorder unit : 1,115 kg
Chiller unit : 63 kg
Environment 23±2°C (73.4±3.6°F), 40 to 70%RH (No condensation)
Power Requirements Recorder unit : Single phase 200 to 240V, 16A , 3.2kW *4
Chiller unit : Single phase 200 to 230V, 3A, 0.6kW
Options High resolution (4000 dpi & Lenticular output) as factory option
0.4 mm thickness plate, Punch system, Up-grade kit (E to S)
Single-cassette autoloader T-9000AL HD
Multi-cassette autoloader T-9000ML HD
Online conveyor, Built-in Bridge
Manual loading kit, Front discharge kit for Manual loading
AF-180N, Signal Tower unit


  • *1When installed at sites where altitude is higher than 1,500 m, 0.4 mm support option will be required even with standard plate thickness(0.3 m).
    In case of high altitude more than 1,500 m, plate with 0.4 mm thickness cannot be supported. When installing the 0.4 mm thickness support option, original blower cannot be used and will be replaced to BU-800.
    Plate size of 0.4mm thickness must be 900 × 770 mm or more.
  • *2Center punch is special order required to check the possibility, please consult with the Screen Subsidiary in your region. Also, center punch cannot be use with HB220, DS220 and some non common press punches.
  • *3Positioning punch system is not installed in T-9800CTP HD.
    Therefore, the notchless function can be used by the standard.
  • *4Includes power requirements of Autoloader.
    The power supply of the BU-800 for high ground or 0.4mm plates cannot be taken from the recorder unit. BU-800 is required separated power source.