|
|
 |
| Measuring modes: |
RI (IP detection),
Fluorescence (Detection of fluorescent dye by R,G,B NIR laser beams),
Digitizing (Gel documentation with Fluorescent plate) |
|
|
| Excitation: |
473nm, 532nm, 635nm, 650nm, 670nm
NOTE* The most suitable PMT is required depending on the combination of exciting lasers among two optional PMTs. |
|
|
Nuclides for RI
Image detection: |
14C, 32P, 33P, 35S, 3H, Neutron, etc. |
|
| 473nm Laser: |
Cy™2, FITC, SYPRO® Ruby, SYPRO® Orange, ECL plus™, silver stain, SYBR® Green I, SYBR® Green II, SYBR® safe, SYBR® Gold, FAM™, Alexa Fluor®488, ECF™ |
| 532nm Laser: |
Cy™3, EtBr, ROX™, HEX™, TAMRA™, Alexa Fluor®546, CBB |
| 635nm Laser: |
Cy™5, Alexa Fluor®633 |
| 670nm Laser: |
Alexa Fluor®680 |
|
| Dynamic Range: |
Five/Four orders of magnitudes changeable
Bit Depth:16bits(gray scale:65,536) |
| Scanning Size: |
IP max; 20(W) X 40(D)cm (effective 18(W) X 36(D)cm)
Fluorescence max; 24(W) X 40(D)cm (effective 22(W) X 36(D)cm) |
| Pixel Size: |
25μm, 50μm, 100μm, 200μm |
| Filters: |
Maximum four optional filters can be equipped;
Excitation of blue dye: Y520
Excitation of green dye: O580
Excitation of red dye: R670
Excitation of near-IR dye: R710
For IP: B390 |
| Interface: |
USB2.0 |
|
| Dimensions: |
940(W) x 556 (D) x 360 (H) mm |
| Weight: |
ca.62kg |
|
| Supply voltage: |
AC100-240±10% |
| Power supply frequency: |
50/60Hz |
| Operating conditions: |
Temperature; 15-30°C
Humidity: 30-70% RH (non-condensing) |
| Power consumption: |
ca.0.3kVA |
|
| IP Eraser 3: Applicable up to 40 X46cm size |
|
PMT 1 (Bi-Alkali)
PMT 2 (Multi-Alkali)
473nm Laser
532nm Laser
635nm Laser
670nm Laser
Y520 Filter
O580 Filter
R670 Filter
R710 Filter
B390 Filter (for IP)
IP Stage
FLUOR stage (with Fluorescent Board)
Membrane weight |
|
|
|
