Extremely fast processing in a compact body streamlines diagnosis
This compact table-top reader unit has outstandingly high-speed processing to challenge the common misconception of CR.
Adobe® Reader® is required to see the PDF data.
FCR PRIMA T2 is a table-top reader unit which boasts a world-class high processing speed of 73 IPs/hour.In the high speed mode (5 pixels/mm), throughput is enhanced almost 70% compared with FCR PRIMA T (only for IPs of 14″ × 17″ and 14″ × 14″ ). As with all Fujifilm equipment FCR PRIMA T2 is easy to operate. It will help reduce patient waiting time and greatly increase the efficiency of examination workflow.
FCR PRIMA T2, with its light and compact table top design, can be placed on a desk, shelf or anywhere space is limited. As this is a fully digital reader, neither a darkroom nor automatic processor is required. FCR PRIMA T2 can always be installed in the space formally used by a chemistry based processor.
Although this is a compact machine its excellent image quality is the same as that produced by the rest of the FCR range. Image Intelligence™, Fujifilm's proprietary image processing technology, enhances image contrast and sharpness, without any deterioration of details. FCR PRIMA T2 supports accurate diagnosis by offering stable and optimized image quality.
Enhances FCR images. All diagnostic scopes will be enhanced except for noise.
Provides a non-grainy image by mainly isolating and suppressing the noise for the signal
Removes the stationary grid patterns thus preventing Moiré from being generated resulting in easier diagnosis.
FCR PRIMA Console and FCRView are an all-in-one viewers that turns your desktop into a multi-function workstation for all your radiographic imaging needs. You can initiate exposures, process and print your studies and backup patient information all within a single unit.
|Standard Components||FCR PRIMA T2 Image Reader (Model: CR-IR 392)|
|Applicable Console||FCR PRIMA Console, FCRView, CR Console, Console Advance|
|Main Connectable Imagers||DRYPIX PRIMA/Smart/Lite/Plus/4000|
|Time Required for IP Feed / Load||Min. 49 sec.|
|Processing Capacity||Up to 73 IPs/hr.|
|Reading Specification||10 pixels / mm, 5 pixels / mm|
|Time to Start on Display||Min. 33 sec.|
|Time to Print on DRYPIX PRIMA||Approx. 165 sec. (Approx. 155 sec.)* in case of 35 × 43 cm(14″ × 17″ )|
|Number of Stacker||1|
|Network||10 Base T / 100 Base TX|
|Dimensions (W × D × H)||560 × 540 × 392 mm (22″ × 21″ × 15″)|
|Weight||39 kg (86 lbs.)|
|Power Supply Conditions||Single phase 50 - 60 Hz
AC 120 - 240 V ±10% 1.9 A (max)