Prescale Sheet Type is a new addition to Prescale series. It is easy to use and uniformly thin as standard Prescale, the pressure measurement film that enables checking of pressure and its distribution, difficult to determine by other means.
When pressure is applied, red patches of various densities will appear according to the pressure level. Six types of films are offered to cover a wide range of pressure levels (0.2 to 300 MPa).

Five 270 mm x 200 mm sheets come in a box.

Two-Sheet Type (Extreme Low:4LW~Medium:MW)

Remove the two Prescale films from the poly envelopes (A-film from the black envelope and C-film from the blue envelope) and cut into an appropriate size. Face the rough surfaces of each film together and insert the films in the desired location. Apply pressure. Red patches appear on the film and the color density changes according to pressure level. Take out the C-film, check the pressure distribution. For further precise pressure values, please use the pressure analyzing system.

Mono-Sheet Type (Medium:MS~Super High:HHS)

Remove the Prescale film from the black poly envelope and cut into an appropriate size.
Insert the film where you want to measure pressure.
Apply pressure. Red patches appear on the film and the color density changes according to pressure level.
Take out the film, check the pressure distribution.
For further precise pressure values, please use the pressure analyzing system.