Prescale Sheet Type : Features

There are two types of Prescale Sheet Type. Mono-sheet type is composed of a polyester base on which the color-developing material is coated, with the micro-encapsulated color-forming material layered on top. Two-sheet type is composed of two polyester bases. One is coated with a layer of micro-encapsulated color forming material and the other with a layer of the color-developing material. Use two films facing the coated sides each other.

When pressure is applied, the microcapsules are broken and the color-forming material reacts with the color-developing material. Red patches appear on the film.

Prescale Sheet Type is the only material in the world able to measure pressure!
Microcapsules are broken and react with a color developing agent when pressure is applied.

Remove the two Prescale films from the poly envelopes (A-film from the black envelope and C-film from the blue envelope) and cut into an appropriate size. Face the rough surfaces of each film together and insert the films in the desired location. Apply pressure. Red patches appear on the film and the color density changes according to pressure level. Take out the C-film, check the pressure distribution. For further precise pressure values, please use the pressure analyzing system.

Remove the Prescale film from the black poly envelope and cut into an appropriate size.
Insert the film where you want to measure pressure.
Apply pressure. Red patches appear on the film and the color density changes according to pressure level.Take out the film, check the pressure distribution.
For further precise pressure values, please use the pressure analyzing system.

• Adjustment of nip roll pressure balance of high-performance films
• Adjustment of pressure balance for lamination rolls
• Measurement of winding pressure for high-performance films
• Adjustment of pressure distribution for vacuum laminators
• Adjustment of pressure distribution and flow check for fuel cell stacks