FinePix F500EXR Firmware Update Ver.1.13

Detail of the update

The firmware update Ver.1.13 incorporates the following issues.

  • 1.Occasionally, preview image on EVF / LCD after pressing the shutter halfway might be darker than live view, according to aperture setting or brightness of shooting target. This phenomenon is improved.
  • 2.The message of the temperature warning just before shutting down the camera is changed.

Example of English version

Current message New message
The temperature inside the camera is heating up. Please wait for a few minutes. Maximum internal temp has been reached.
Turn off & allow to cool or will turn off automatically.
  • 3.The selector buttons (4-direction buttons) of the camera can be fully operated without any problem when the camera is inserted with the waterproof case WP-FX500.

The firmware update Ver.1.10 incorporates the following issues.

  • 1.LCD display is much smoothly transferred into "USB" mode, after connecting the camera to the PC via USB cable. (just for some shooting condition only)

Precaution

  • 1.If firmware updating fails, the camera may no longer operate correctly in some cases.
    Carefully read the notes provided here.
  • 2.Always use the fully-charged NP-50 battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
    Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
  • 3.Firmware updating requires approximately 90 seconds.
  • 4.Once the firmware has been updated, the previous version cannot be restored.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.