IS Pro Firmware (camera control software) Update Ver.1.03

Detail of the update

The firmware update (Ver.1.02 to Ver.1.03) incorporates the following issue.

  • An issue that, in some rare case, the camera may be frozen when PC controlling software (included in "Hyper Utility HS-V3") is used, has been resolved.

The firmware update (Ver.1.01 to Ver.1.02) incorporates the following issue.

  • An issue that, in some rare circumstances, caused the battery indicator to blink, regardless of actual battery charge, has been resolved.

The firmware update (Ver.1.00 to Ver.1.01) incorporates the following improvements.

  • 1.Upgrade of Image Quality Setting.
    The following functions are added and activated in [RAW] menu(*1) for [QUALITY].
    • Recording with TIFF-RGB format.
    • Playback of images recorded by IS Pro with TIFF-RGB format.
  • 2.Better image quality of "live" view when using Hyper-Utility software HS-V3(*2) or HS-V3 UP(*2)
    *1 When TIFF-RGB format is selected , Image quality displayed on Control panel is "RAW".
    *2 IS Pro optional products in which recording with TIFF-RGB format is not available when using ’Shoot from PC function’.

Precaution

  • 1.If firmware upgrading fails, the camera may no longer operate correctly in some cases.
    Carefully read the notes provided here.
  • 2.Always use the AC adapter or the full charged battery NP-150 when upgrading the firmware.
    Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
  • 3.Firmware upgrading takes approximately 1 minute.
  • 4.Once the firmware has been upgraded, the previous current cannot be restored.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.