FinePix HS10 / HS11 Firmware (camera control software) Update Ver.1.04

Detail of the update

The firmware update Ver.1.04 incorporates the following item.

  • 1.Custom white balance can be set correctly when an external flash is mounted.
  • 2.On slide show mode, sound of movie recording data can be performed on the HDTV which is connected with the camera via HDMI interface.

The firmware update Ver.1.02 incorporates the following item.

  • 1.In Raw data a line is visible where colors slightly change when developed by Raw File Converter.
  • 2.Battery indicator turns on too early.
  • 3.When "Image Disp." in set-up menu is set to "Zoom", sometimes image corrupts.

The firmware update Ver.1.01 incorporates the following item.

It corrects the problems below.

  • 1.Some distorted images with pin-cushion type can be captured at AE bracketing mode
  • 2.Sometimes unclear details in images
  • 3. In RAW + JPEG mode, JPEG images are sharper
  • 4.Soft image or not smooth enough color gradation in D-range 200, 400% than in 100%

Precaution

  • 1.If firmware updating fails, the camera may no longer operate correctly. Please read the provided notes carefully.
  • 2.Prepare either of the following batteries before updating.
    • Fully-charged AA-size Ni-MH batteries (4)
    • New AA-size alkaline batteries (4)
    • New AA-size Lithium batteries (4)
  • 3.Do not turn the camera off, open the battery cover or attempt to use any of the camera controls while the firmware is being overwritten.
  • 4.Firmware updating requires approximately 10 seconds.
  • 5.Once the firmware has been updated, the previous version cannot be restored.
  • 6.If you encounter difficulties updating the firmware, please contact the Technical support & Repair service.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.