FinePix S1 Firmware Update Ver.1.01

Please read this update after refreshing this page.

  • * In case of Internet Explorer and Google Chrome, hold down the control key and press the F5 key.
  • * In case of Safari, hold down the control key and press "R" key.

Preparing for updates

  1. 1.Prepare the target digital camera.
    • FinePix S1 (Version 1.00)
  2. 2.Prepare a formatted memory card.
    • The firmware updating procedure requires a formatted memory card. Refer to the Owner's Manual for information on using "FORMAT" in the SET-UP menu to format a media.
    • Note that formatting procedure will delete all data on the memory card, including protected files. Always copy any important files that you do not want to lose to your PC beforehand.
  3. 3.Prepare the power supply.

    Use the fully-charged battery.

Firmware version checking procedure

(Screenshot for version 1.00)

Insert a blank formatted media in the camera. Turn on your "Camera" while holding down the [DISP/BACK] button. The number will displayed "CURRENT" showing the camera's current firmware version.

After checking the firmware version, press the [MENU/OK] button and then turn off your camera.

Download

Notes

Check if there is no file with the same name in a destination of the firmware to save.
If there is a file with the same name, a browser can automatically change the name of the firmware and a camera cannot recognize the firmware correctly.

How to use this updater

STEP1 Download the firmware onto your PC.

You can download the firmware using the "Downloading the firmware upgrade" link on.

Firmware upgrade
File name FPUPDATE.DAT
File size 13.2MB

Downloaded files must be put on desk top of your PC.
If the file size does not match the figures given above, download the firmware update file again.

STEP2 Copy "FPUPDATE.DAT" to the memory card

  1. 1.Insert a memory card formatted by the camera into your card reader.
  2. 2.Copy the "FPUPDATE.DAT" file downloaded in step 1) onto the root directory of the memory card.
  3. 3.Remove the memory card from the card reader and insert it into the camera.

STEP3 Update the firmware.

Check the memory card containing the copied firmware update into the camera.
Always use fully-charged battery when updating the firmware.

1. Turn the camera on while holding down the [BACK] button.

*This screen appears regardless of whether the AC adapter is already connected or not.
When this screen appears, press the [OK] button.

2.Press the [left button] to select "OK".

Press the [OK] button.(The screenshot is an example of firmware upgrade from version 1.00 to version 1.10)

3.Press the [OK] button.

4.Press the [OK] button.

The firmware updating is started.

It takes approximatery 90 seconds for completing the firmware update.

5.When this screen appears, the firmware update has been successfully completed.

6. Turn the camera off

STEP4 Check the upgraded firmware.

By following the above procedure "Firmware version checking procedure", you can see the firmware version.

Cf. The media used for the firmware update should be reformatted before you use it for taking pictures again.

Troubleshooting

  • *Please check here if you encounter any problems.