Turn on your camera , press the [SETUP] button, choose the [MAINTENANCE] menu and then choose the [FIRMWARE VERSION] menu.
[VERSION NO.] on the display means the actual firmware version in your camera.
(Screenshot for version 1.01)
After checking the firmware version, press the [MENU/OK] button and then turn off your camera.
You can download the firmware upgrade using the "Downloading the firmware upgrade" link on this page.
|File size||7,995,628 bytes|
|Firmware upgrade transfer program for Windows 98SE/Me/2000/XP users|
|File size||143,360 bytes|
|Firmware upgrade transfer program for Windows Vista users|
|File size||159,744 bytes|
Downloaded files must be put on desk top of your PC.
If the file size does not match the figures given above, download the firmware update file again.
|Firmware upgrade transfer program|
|File size||2,621,440 bytes|
Downloaded files must be put on desk top.
If the file size does not match the figures given above, download the firmware upgrade file again.
Double-Click "FPUPDATETRF.DMG" to make a new folder that includes "FPUPDATETRF".
Move "FPUPDATETRF" in the new folder onto desk top.
(The data is copied without generating a folder.)
The software provided on the CD-ROM bundled with the camera must be installed on the PC.
Always use the AC adapter or rechargeable battery NP-150 when upgrading the firmware.
1.Remove all the USB devices connected to the PC except a mouse.
2.Connect the camera to the PC.
* Refer to the FinePix S5 Pro Owner's Manual (p.194) for more information on connecting the camera.
If FinePix Viewer were activated automatically, you should inactivate it.
3.Double-click the "FPUpdete.exe", the "FPUpdeteV.exe" or the "FPUDATATRF" file on desk top.
Click the [OK] button on the window.
4.Click the [Exit] button on the window.
5.Cancel the DSC connection and disconnect the camera from the PC.
This completes the copying of the firmware upgrade to the Media.
Turn the camera on while holding down the [BACK] button.
*This screen appears regardless of whether the AC adapter is already connected or not.
When this screen appears, press the [OK] button.
Press the [left button] to select "OK".
(The screenshot is an example of firmware upgrade from version 1.01 to version 1.04)
Press the [OK] button.
Press the [OK] button.
The firmware is then upgraded.
Firmware upgrading takes about 1 minute.
When this screen appears, the firmware update has been successfully completed.
Turn the camera off and turn the camera on while holding down the [BACK] button again.
Check the firmware version on the LCD display.
The media used for the firmware upgrade should be reformatted before you use it for taking pictures again.