This website uses cookies. By using the site you are agreeing to our Privacy Policy.



X-H1 Camera Body Firmware Update Ver.1.10

Please read the followings and update the firmware.

Notes

  • · Please read this update after refreshing this page.
    • * In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the "Control" key and "F5" key.
    • * In case of Mac (Safari / Google Chrome), hold down the "Command" key and "R" key.
    • * In case of Mac (FireFox), hold down the "Command", "Shift" and "R" keys at same time.
  • · The firmware upgrade is not required if its version is 1.10.
    • * Refer to "2) Firmware version checking procedure" in the "Detail of firmware update steps" below to check the firmwawre version.
  • · Please use your camera and lens with the latest version of firmware.
    (If you don't use them with the latest version, you may not enjoy their full performance.)

Detail of the update

The firmware update Ver.1.10 from Ver.1.02 incorporates the following issues:

Regarding the details of No.1,3,6 and 7 download the "X-H1 New Features Guide[Ver.1.10]" from our website.

  • 1. Addition of “Focus Bracketing”
    The update will enable the photographer to shoot focus distance bracketing up to 999 frames. When the photographer begins shooting, the focal location is shifted with each activation of the shutter by the step of focus shift set from 1 to 10.
  • 2. Compatible with the newly developed cinema lens FUJINON MKX18-55mmT2.9 lens and FUJINON MKX50-135mmT2.9 lens  
    The upgrade will add compatibility for the newly developed FUJINON MKX18-55mmT2.9 lens and FUJINON MKX50-135mmT2.9 lens
    1) Aperture information can be displayed on the monitor. The upgrade allows users to select T-stop or F-stop.
    2) The upgrade allows users to check the focus distance with the distance indicator shown on the monitor.
    3) Automatically corrects the distortion and the color/brightness shading.
    4) Camera automatically calculate the White Balance based on the lens position and deliver the color expressions with Film Simulation modes.
  • 3. Enlarged and customizable indicators or information  
    The upgrade allows users to enlarge indicators and information in the viewfinder and/or LCD monitor. This upgrade will also enable users to customize the location of where the information is shown on the display.
  • 4. Enhanced Phase Detection AF during movie recording  
    Enabled phase detection AF at smallest area size when in single point AF, making phase detection AF active all 6 area sizes both in AF-S/AF-C mode.
  • 5. Expanded Phase Detection AF Area options during still shooting
    Phase detection AF is now available in the smallest size single AF point when shooting in AF-S and AF-C modes. This takes the total phase detection AF areas to 6.
  • 6. Enhanced Bluetooth®* connectivity via “FUJIFILM Camera Remote” app.  
    The upgrade allows users to utilize the following functions with the latest “FUJFIILM Camera Remote” app.  
    1) It synchronizes "date and time" and/or "location information" of smartphone and tablet devices when used with cameras with Bluetooth® capability  
    2) The upgrade allows users to select multiple smartphones or tablet devices by paring the cameras.(Up to 7 devices)  
    3) Update the firmware** of compatible cameras that offer Bluetooth® capability via smartphone or tablet devices.
    4) It supports Bluetooth® wireless remote control camera shutter release** for cameras that offer Bluetooth® capability.
    * The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
    ** An upgrade to the latest “FUJIFILM Camera Remote (Ver.3.2.0)” is required to operate firmware update and camera shutter release.
  • 7. Addition of Fn button support for “IS Mode”  
    The upgrade allows users to set the Fn button as “IS Mode” for quicker setting changes.
  • 8. New functions are added to store and read of camera settings by FUJIFILM X Acquire.
    Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. With “FUJIFILM X Acquire” (ver.1.7 or newer), CUSTOM REGISTRATION/EDIT settings are also stored and read.

Firmware update history(up to version 1.02)

Firmware update steps

Summary of firmware update steps

  1. 1. Check the firmware version.
  2. 2. Prepare a formatted memory card.
  3. 3. Download the firmware and copy it to the card.
  4. 4. Put the memory card with the firmware in the camera and update it.

Detail of firmware update steps

Please refer to the steps below about necessities and steps for firmware update.

Precaution

  • 1.If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
  • 2.Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
  • 3.You can update the firmware from old version directly to the latest one.
  • 4.Firmware updating requires approximately 90 seconds.
  • 5.Once the firmware has been updated, some data of the previous version cannot be restored.
  • 6.Please check here if you encounter any problems.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.