X-M1 Firmware Update Ver.1.20

Please read this update after refreshing this page.

  • * In case of Internet Explorer and Google Chrome, hold down the control key and press the F5 key.
  • * In case of Safari, hold down the control key and press "R" key.

Detail of the update

The firmware update Ver. 1.20 from Ver. 1.10 incorporates the following issues:

Regarding operations of No.1, refer to "Printing from a Digital Camera to an instax SHARE Printer" below.

  • 1. Addition of compatibility with "instax SHARE SP-1"
  • Images can be directly transferred to the "SP-1" from a camera and then printed.
  • 2. Addition of compatibility with "XF18-135mmF3.5-5.6 R LM OIS WR"
  • To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 3. Change of aperture display for zoom lenses
  • Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.
  • 4. Improvement of recorded sound
  • Sound quality of a movie shooting is improved.

The firmware update Ver. 1.10 from Ver. 1.01 incorporates the following issue:

  • 1.Addition of compatibility with "XF56mmF1.2 R".
  • Improvement of AE accuracy with "XF56mmF1.2 R".

The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues

  • 1.AF accuracy is optimized for still image.
  • 2.The phenomenon is fixed that a camera will automatically turn off during "Bulb (B)" shooting with the "CONTINUOUS" setting in "IMAGE DISP."
  • 3. The phenomenon is fixed that in rare cases, gray stripes could appear in highlight portion of images with a standard viewer of a smartphone (only Android).

Precaution

  • 1.If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
  • 2.Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
  • 3.Firmware updating requires approximately 90 seconds.
  • 4.Once the firmware has been updated, some data of the previous version cannot be restored.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.