This website uses cookies. By using the site you are agreeing to our Privacy Policy.



Firmware update history(up to version 2.00)

The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues:

Regarding the details of No.1,3 and 6 download the "X-T3 New Features Guide" from our website.
  • 1. 4K HDR video recording in Hybrid Log Gamma (HLG)
    Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards (*1). It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
    *1:Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.
  • 2. Simultaneous output of Film Simulation and F-Log footage (*2)
    Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
    *2:Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode. Also, cannot choose different image size (4K/FHD) for HDMI output and internal SD card recording.
  • 3. Display color temperature (Kelvin) on EVF/LCD Color temperature (Kelvin) can be displayed on EVF/LCD.
  • 4. Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P (*4) Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. *4:Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD Long GOP recording. For detail, refer to the Shutter Speed in the “Movie Recording Mode” list.
  • 5. Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
    Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
  • 6. Display power supply icon
    Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD (*5) and Anker PowerCore Speed 20000 PD (*6).
    *5:Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
    *6:Product may not be available on your country.
  • 7. Fix of slight defects.

The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:

  • 1. The phenomenon is fixed that in rare cases, the buttons cannot be used while using histogram display or sports finder.
  • 2. The phenomenon is fixed that in rare cases, RAW image cannot be recorded normally under a certain conditions (Sports finder mode, continuous shooting with electronic shutter and so on)
  • 3. Fix of slight defects.

The firmware update Ver.1.01 from Ver.1.00 incorporates the following issues:

  • 1. Compensation of distortion is optimized in CH shooting with electronic shutter.
  • 2. The phenomenon is fixed that the mechanical LOCK of some SD cards is not recognized.
  • 3. Fix of other slight defects