Firmware upgrading has five steps
Insert a blank formatted memory card in the camera. Open the lens cover completely while holding down the [DISP/BACK] button.
The number displayed on the screen is the camera’s "CURRENT" firmware version.
Use of an AC adapter is recommended. If AC adapter is not available, please use a fully charged battery.
After checking the firmware version, press the [MENU/OK] button and then turn off your camera.
You can download the firmware upgrade using the "Downloading the firmware upgrade" link on this page.
|File size||4.5M bytes|
|Firmware update transfer program for Windows XP or Vista users|
|File size||164K bytes|
You can choose either of the following methods.
Before this procedure, the software provided on the CD-ROM bundled with the camera must be installed on the PC.
Both the downloaded firmware upgrade file and transfer program must be placed on the desktop of your PC.
1.Remove all the USB devices connected to the PC except for the mouse.
2.Connect the camera to the PC.
* Refer to the FinePix Z100fd Owner’s Manual (p.119-126) for more information on connecting the camera.
As the software "FinePix Viewer" is activated automatically after connecting, this software must be stopped before the next procedure.
3.Invocation for the transfer program
Double-click "FPUpdataV.exe" on desk top of your PC
Click the [OK] button on the dialog.
Click the [Exit] button on the dialog.
4.Turn off the camera.
5.Disconnect the camera from the PC.
This completes the copying procedure of the firmware update to the memory card.
For the next step, keep the memory card containing the copied firmware update in the camera.
Check the memory card containing the copied firmware update into the camera.
Always use an AC adapter or a fully charged battery when updating the firmware.
*Use of an AC adapter is recommended. If AC adapter is not available, please use a fully charged battery.
Press the [OK] button.
Press the [OK] button.
(The screenshot is an example of firmware upgrade from version 1.00 to version 1.01)
The firmware is then upgraded.
It takes about 15 seconds for completing the firmware update.
When this screen appears, the firmware update has been successfully completed.
Following the procedure in step 1)Check the firmware version,Econfirm the current firmware version.
Cf. Please reformat the media before taking pictures.