Firmware upgrading has five steps
Turn on your Camera and show the "VERSION INFO" screen in "SET-UP" through "MENU" screen.
The number displayed on the screen is the camera’s "CURRENT" firmware version.
Use of either of the following batteries.
You can download the firmware upgrade using the "Downloading the firmware upgrade" link on this page.
|Firmware update transfer program for Windows XP users|
|Firmware update transfer program for Windows Vista / 7 users|
|Firmware update transfer program|
Read the firmware upgrade user license agreement and agree to the terms before downloading the upgrade.
You can choose either of the following methods.
Before this procedure, the software provided on the CD-ROM bundled with the camera must be installed on the PC.
Both the downloaded firmware upgrade file and transfer program must be placed on the desktop of your PC.
1.Remove all the USB devices connected to the PC except for the mouse.
2.Connect the camera to the PC.
* Refer to the your "Camera" Owner’s Manual for more information on connecting the camera.
As the software "MyFinePix Studio" is activated automatically after connecting, this software must be stopped before the next procedure.
3.Invocation for the transfer program
Double-click "FPUPDATE.DAT" file on desk top of your PC
Click the [OK] button on the dialog.
Click the [Exit] button on the dialog.
4.Turn off the camera.
5.Disconnect the camera from the PC.
This completes the copying procedure of the firmware update to the memory card.
For the next step, keep the memory card containing the copied firmware update in the camera.
Screenshots depends on cameras.
Screenshots of FinePix Z90 / Z91 are somewhat differents from ones shown in steps below.
Check the memory card containing the copied firmware update into the camera.
Always use fully-charged NP-45A when updating the firmware.
(The screenshot is an example of firmware upgrade from version 1.00 to version 1.01)
It takes approximately 1minute for completing the firmware update.
When this screen appears, the firmware update has been successfully completed.
Following the procedure in step 1) "Check the firmware version," confirm the current firmware version.
Cf. Please reformat the media before taking pictures.