Hyper-Utility Software HS-V3 Ver.1.1 Updater for Windows Vista(32-bit x86)/Vista(32-bit x86) SP1,XP SP2/SP3, 2000 SP4

Download

How to use this updater

STEP1

Install the Hyper-Utility Software HS-V3 from your belonging CD-ROM if it is not installed.
If you have Hyper-Utility Software HS-V3 Ver.1.0 and Windows Vista is used, it is not necessary to install.

STEP2

Quit Hyper-Utility Software if it is started.

STEP3

Execute this updater software (V3UP11B.exe).

STEP4

Check of HS-V3 for upgrade.
If the HS-V3 is not installed, the upgrade target CD-ROM confirmation screen appears.

For HS-V3 users:
Load your belonging CD-ROM(HS-V3) into the CD-ROM drive.

For HS-V3UP users:
First, load your belonging CD-ROM(HS-V3UP) into the CD-ROM drive.
Next, insert the HS-V2 or HS-S2 CD-ROM instead.

Note

  • To use PC SHOOTING FUNCTION you need update the firmware of the FinePix S5 Pro to version 1.08 or later.
  • FinePix S5 Pro Firmware (camera control software) Update
  • For Windows 2000/XP
    If the software is set to launch automatically, the HS-V2 or HS-S2 installer starts up and an error appears during startup. Click the [OK] button to exit the installer.
  • For Windows Vista
    When the "AutoPlay" window appears, click the [×] button to close the window.