This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Argentina
[photo] instax mini Link printer in Ash White color

instax mini Link

NEW

Front

  1. Film ejection slot
  2. Power button/LED
  3. USB port cover

Specifications

Recording method

3-color exposure with OLED

Film used

FUJIFILM instax mini Instant Film (sold separately)

Number of films

10 films/pack

Film size

86mm x 54mm

Image size

62 mm x 46 mm / 2.4 in. x 1.8 in.

Supported image size

800 × 600 dots

Printing resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels

256 levels per color (RGB)

Interface

Standard compliance: Bluetooth Ver. 4.2 (BLE)

Supported image format

JPEG、PNG、HEIF

Printing time

Image recording - photo output (fed out):Approximately 12 sec.

Approximate printing capacity

Approximately 100 prints (from full charge)

  • * The number of prints depends on the usage conditions.
Power supply

Lithium ion battery (internal type: not removable)

Charging time

Approximately 80 to 120 minutes(Charging time depends on the temperature and battery remaining level)

Power consumption

Approximately 3 W

Operating environment

Temperature: +5°C to +40°C (+41°F to +104°F)
Humidity: 20% to 80% (no condensation)

Main unit dimensions

90.3 mm x 34.6 mm x 124.5 mm /
3.5 in. x 1.3 in. x 4.9 in.(excluding projecting parts)

Main unit mass

Approximately 209g / 7.3oz (excluding film pack)

Supplied accessory

USB cable

  • The instax prints depicted are for illustrative purposes only.
  • Specifications above are subject to change for improvement.
  • The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
  • The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.
  • The image size may affect sharpness and graininess of the finished print.
  • Depending on the file size and smartphone type, wireless communication may take a long time.
  • The smartphone type and shooting condition may affect the color tone and quality of the finished print.
  • The finished print may look different from the image viewed on the smartphone display.
  • The smartphones printed are simulated ones.