The content on this page is intended to healthcare professionals and equivalents.
Next generation imaging
A 25 × 30 cm glass-free flexible sensor
High quality image & Low Dosing
ISS system reading technology promotes higher sensitivity
Like FDR D-EVO II, FDR-D-EVO III is Equipped with an indirect conversion system called the ISS method which bonds optical sensors (TFT) to the X-ray irradiation side unlike traditional flatpanel detectores. This greatly suppresses scattering and attenuation of X-ray signals, creating a sharp image with low X-ray dose.
Synergism between ISS method and flexible film-based TFT detector
By changing the TFT detector of FDR D-EVO III from glass-base to film-base, X-ray transmittance is improved compared to FDR D-EVO II. FDR D-EVO III achieved DQE 58% from 54% (1Lp/mm-RQA5 1mR) by applying a flexible film to a base of the device detector. This unique technology combination is only possible with proprietary ISS technology to fully implement the benefits of film-based detectors.
Mini & Flexible size
The 25 × 30 cm cassette size widely used in radiography is adopted to open up even more possibilities for X-ray imaging in fields such as orthopedics and pediatrics.
Imaging proceeds smoothly with the device linked with existing peripheral devices, such as incubators and pediatric X-ray couches.
Structured to prevent the infiltration of liquids, the device conforms to IPX6 and can withstand jets from any direction*1. There is no need to worry for fluid permeation inside the device caused by fluid like blood or vomit. The device also complies with IP5X for dust-proof structure, preventing malfunction caused by small particles*1.
Forging frames constructed with Mg-Li alloy provides robust protection for internal devices, while maintaining a lightweight design. With this technology, FDR D-EVO III has a 310kg load capacity.
The FDR D-EVO III detectors are coated with Hydro Ag antibacterial coating, which has an antibacterial effect 100 times greater than that of conventional Ag coatings*2. This longer-lasting higher intensity antibacterial effect prevents bacterial growth.
A hyper-hydrophilic binder allows easy cleaning and hygienic use, together with the easy-to wipe flat design of the detector.
Easy-to-clean flat shape
The FDR D-EVO III introduces a flat design and reduced contours, promoting easier and more efficient cleaning.
Battery charger, docking stand, power supply unit and power box for FDR D-EVO II can also be operated with FDR D-EVO III, for improved usability and easier handling.
LED lamps on the front of device for better visualization
LED lamps are equipped on four sides of the front of the detector, for a visual assistance.
- Centralizing the device and distinguishing devices
Equipped with side-center LEDs on four sides of the detector, for easier positioning of the device during imaging. There are five LED colors (blue, pink, orange, lime-yellow and purple), to distinguish different devices for different colors when using multiple devices.
- Device status displayed in green
When the device is ready for X-ray exposure, the LED lights up in green.
- Front side identification in white
It lights up in white to identify the top-side and bottom-side of the detector.
Up to 100 images can be stored in the panel’s internal memory. The LED display shows the number of stored images along with the battery status. You can check that information even when the panel is being used on its own.
The docking stand works together with the console to display the detector’s “Ready” status and identify color using the LEDs. This makes it easy to check the current state of the detector even from far away.
FDR D-EVO III is compatible with 2.4GHz and 5GHz (W52/53/56)*3 spectrum, making the device suitable for outdoors use. Also, the device supports IEEE802.11 ac, the new high-speed wireless LAN.
Image display speed and cycle time has been improved approximately by 1.5 seconds when wirelessly connected, as compared to our previous FDR D-EVO models.
The small AP required for previous mobile solution is not necessary for the FDR D-EVO III. With just the panel and mobile console, high mobility can be achieved.
FDR D-EVO III enables users to select and switch between systems simply by pressing the button on the back of the panel.
Fujifilm developed a technology “SmartSwitch” which allows automatic X-ray detection. With SmartSwitch, FDR D-EVO III no longer requires connection between the X-ray generator and DR power supply unit to automatically detect X-rays and start image creation.
Advanced image processing
3D structure analysis technology to support mobile exam
Provides a high quality image without using a grid
Virtual Grid processing corrects for the effects of scatter radiation. Without the need for a grid, Virtual Grid retains high contrast and image sharpness, while preventing the asymmetric density resulting from misalignment of X-ray tube and detector.*5
Multiple body parts supported
Dynamic Visualization II
Optimizes image quality using latest Exposure Data Recognizer
Advanced recognition algorithms automatically adjust contrast and density for individual body parts based on calculation of estimated 3D image data.*5
Product Name：FDR D-EVO III (Model number : DR-ID 1800)