This website uses cookies. By using the site you are agreeing to our Privacy Policy.

[photo] instax mini Link 2 smartphone printer in CLAY WHITE color

instax mini Link 2



  1. Film ejection slot
  2. Feature button
  3. Power button/LED
  4. Micro USB port cover
  5. Micro USB port
  6. Reset button*1


  1. Film door lock
  2. Side LED
  3. Film door
  • *1 If the printer does not work properly, press the reset button to reset the printer.


Recording method

3-color exposure with OLED

Film used

FUJIFILM INSTAX Mini Instant Film (sold separately)

Image size

62 mm × 46 mm

Exposure pixel count

800 × 600 dots

Exposure resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Exposure gradation

RGB gradation of 256 colors


Bluetooth Ver. 4.2 (BLE)

Printable image format


Printing time

Image recording - photo output (fed out): Approximately 15 sec.

Possible number of printed images

Approximately 100 (from full charge; number of prints depends on the usage conditions.)

Power supply

Lithium ion battery (internal type: not removable)

Charging time

Approximately 80 to 120 minutes (depending upon environment temperature at time of charging)

Power consumption

Approximately 3 W

Operating environment

Temperature: +5 ºC to +40 ºC
Humidity: 20% to 80% (no condensation)

Main unit dimensions

91.9 mm × 36.4 mm × 124.8 mm (excluding projecting parts)

Main unit mass

210 g (excluding film pack)

Supplied accessory

Micro USB cable (BOD700-200, Length: 30 cm)

  • * Images of instax printing are for illustrative purposes only.
  • * After an image is shot, it takes a short amount of time to display on the screen.
  • * The above specifications are subject to change for performance improvement.
  • * Image size may affect print finish (sharpness, grain, etc.).
  • * Time required for wireless communication may be affected by file size, smartphone model, etc.
  • * Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
  • * Actual print finish may differ from the image displayed on the LCD screen of your smartphone.
  • * Smartphone screen images are superimposed.
  • * The Bluetooth® word mark and logo are registered trademarks of Bluetooth SIG, Inc. and FUJIFILM Corporation uses these under license.
  • * QR code is a registered trademark of DENSO WAVE INCORPORATED.