PSE Cartridge XL Type
NEWAn ultra-high flow rate type of cartridge (2 times the flow rate of conventional cartridges) has been added to the lineup of PSE cartridges that have been received favorably because of their high flow rate and high retention performance. Best suited for cleaning Gen 6 and Gen 7 large LCD glass substrates.
Overview
-
These ultra-high flow rate cartridge filters demonstrate excellent cleaning performance for Gen 6 and Gen 7 large LCD glass substrates.
-
The proprietary membrane offers excellent performance by combining a high fine particle retention with a high flow rate and long service life.
Features
Ultra-high flow rate
The cartridge realizes a high flow rate equivalent to 2 times that of earlier cartridges. A flow rate of 100 L/min. or more is ensured with a pore size of 0.2µm. (At ΔP = 0.02 MPa)
High fine particle retention performance
The proprietary dense inner layer of the PSE membrane that features a well-defined pore size distribution ensures reliable retention of fine particles.
Can be used with existing housings
The cartridge fits many existing housings that are ready for use at a high flow rate, and an ultra-high flow rate can be obtained without changing the housing.*1
- *1 Regarding fittability to the housings, contact us for consultation.
Main applications
The cartridge employs a membrane of a favorably received, proprietary asymmetrical structure (PSE membrane). It demonstrates excellent performance in the following applications that require high fine particle retention performance, a high flow rate and long service life.
-
Filtration of cleaning water used by wet process equipment that makes large glass substrates for LCD
Specifications
Table of Performance Characteristics
|
Item |
Unit |
Performance |
Remarks |
|||
|---|---|---|---|---|---|---|
|
Pore size |
µm |
0.1 |
0.2 |
0.45 |
||
|
Size |
Length |
mm |
266 |
*1 |
||
|
Outer diameter |
mm |
81.5 |
|
|||
|
Maximum differential pressure |
25℃ |
MPa |
0.34 (Positive pressure) |
|
||
|
PH area to be used |
|
1 - 14 |
*2 |
|||
- *1 Please contact us if you need detailed dimensions of the M type.
- *2 In the case of using the cartridge for chemical fluid filtration, prior evaluation should be carried out under the planned conditions of use.
Material
|
Part name |
Material |
|---|---|
|
Guard |
Polypropylene |
|
Center core |
Polypropylene |
|
Support |
Polypropylene |
|
Membrane filter |
Polysulfone (Asymmetric membrane) |
|
O-ring |
EPDM (Silicon, Viton) |
Water flow differential pressure ΔP high flow rate area
Abbreviated product name
|
|
Pore size |
|||
|---|---|---|---|---|
|
0.1 µm |
0.2 µm |
0.45 µm |
||
|
Shape |
M type |
PSECM10XLSPPW1 |
PSECM20XLSPPW1 |
PSECM45XLSPPW1 |
|
PM type |
PSECPM10XLSPPW1 |
PSECPM20XLSPPW1 |
PSECPM45XLSPPW1 |
|
Size
- * For details of the methods of use, refer to the instruction manual that comes with the product.
- * The product may be built to order, depending on the shape and/or size. For details, contact your sales agent.
- * Specifications are subject to change for improvement purposes without prior notice.