FUJIFILM Business Innovation was the first company in Japan to sell plain paper copiers, revolutionizing offices and the way work is done.
Our longstanding focus has been on providing multifunction printers (MFPs) and solutions with high environmental performance.
Through our products, we contribute to reducing environmental impact for both our customers and society.
This ongoing commitment will further redefine the meaning and value of "work."
With these ideals in mind, we have developed a variety of technologies and functions aimed at reducing CO2 emissions and promoting resource recycling. Our mission is to reduce environmental impact through our MFPs and solutions.
Today, we continue our quest to create work styles that are more creative, productive, and have a lower environmental impact.
- Note: The content of this web page pertains to the Japanese market and is based on products and solutions available in Japan. Product lineup varies depending on country/region.
FUJIFILM Business Innovation pursues technologies that not only reduce environmental impact but also improve work quality.
Here, we introduce the technologies used in MFPs and printers and the related solutions that support both "environmental impact reduction" and "work quality improvement".
- Note: The content of this web page pertains to the Japanese market and is based on products and solutions available in Japan. Product lineup varies depending on country/region.
Technologies that support both "environmental impact reduction"
and 4 "work quality improvements" (Efficient, Quality, Secure, DX)
Technologies that support both "environmental impact reduction" and 4 "work quality improvements" (Efficient, Quality, Secure, DX)
Achieving both efficiency and reduced power consumption.
With increased LED illumination, high-speed scanning can be performed. Scanning is done quickly, allowing for efficient digitization.
- *1 : Depending on the model, high-speed scanning of up to 270 pages/minute is possible (with one-pass duplex scanning)
Power consumption of the illumination during scanning has been reduced*2 to about 1/3 of that before the introduction of this technology*3.
- *2: When compared with the conventional xenon lamp method in our A3 MFPs.
- *3: Introduction of white LED started from the ApeosPort-IV / DocuCentre-IV series. Xenon lamp had been introduced until ApeosPort-III C3320 series.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*
- ApeosPort-VII C7773 R Series*
- ApeosPort-VI C7771 RC Series*
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos 1860
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
Unused parts are not activated, which reduces the operating noise and makes it easier to concentrate on work.
This technology enables power supply on a per-function basis. Compared to previous methods, it reduces power consumption by approximately 8%*1 during printing and by about 61%*2 during scanning and faxing.
- *1: Power consumption during printing is for Apeos C7070 (100 V). Reduction is approximately 9% for Apeos C7070 (230 V) and approximately 7% for Apeos C7070 (115 V).
- *2: Power consumption during scanning/faxing is for Apeos C7070 (100 V). Reduction is approximately 60% for Apeos C7070 (230 V) and approximately 61% for Apeos C7070 (115 V).
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*
- ApeosPort-VII C7773 R Series*
- ApeosPort-VI C7771 RC Series*
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos 1860
- Apeos C5240
- Apeos C4030 Series
- Apeos 6340
- Apeos 5330
- ApeosPrint C5240
- ApeosPrint C4030 Series
- ApeosPrint 6340
- ApeosPrint 4830 Series
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
Simply standing in front of the MFP automatically changes the power-saving mode to operation mode, allowing you to start working efficiently.
Sleep mode, which consumes less power (by 99% or more*) than standby power consumption, is easier to use, leading to reduced power usage.
- *: For Apeos C5570 / C4570 / C3570 / C3070 / C2570. Ready mode power consumption is 90 W for Apeos C5570 / C4570 (230 V) and 99 W for Apeos C5570 / C4570 (110 V). Sleep mode power consumption is 0.5 W for Apeos C5570 / C4570 (230 V / 110 V).
- ApeosPro C810 Series
Apeos C8180 Series
Apeos C7071
Apeos C7070 Series
ApeosPort C7070 R Series*
ApeosPort-VII C7773 R Series*
ApeosPort-VI C7771 RC Series*
Apeos 7580 Series
Apeos 4570 Series
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
No waiting required for printing to start
Preheating of the fuser, which instantly melts the toner at high temperature to fuse it on paper, is no longer necessary. The startup time is shortened and printing can start immediately.
- *1: Applies to Apeos C3570 / C3070 / C2570. At room temperature of 23℃.
The fuser accounts for about 70% of the total power consumption of MFPs and printers. The TEC value for the entire device has been reduced by approximately 58% for the models after the introduction of IH technology, compared to the models before the introduction.
- *2: When comparing Apeos C3570 (Model-PFS) with a conventional product of the same speed before the introduction of this technology (ApeosPort-III C3300 CPFS). TEC value is calculated using ENERGY STAR v3.0. This also includes power reduction effect by technologies other than IH fusing technology.
- *3: 60.9% reduction for Apeos C3570 (230 V), 58.1% reduction for Apeos C3570 (115 V)
- Apeos C7071 Series
Apeos C7070 Series
ApeosPort C7070 R Series*
ApeosPort-VII C7773 R Series*
ApeosPort-VI C7771 RC Series*
Apeos 4570 Series
ApeosPrint C5570 Series
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
high-quality output with less power and paper waste.
New toner realizes both environmental impact reduction with low-temperature fusing and high image quality with small particles. High-quality color output realizes more clearly defined characters and lines, and beautifully reproduces gradations such as halftones.
We have been making efforts to develop toner with low fusing temperature. The fusing temperature of the new toner*1 with new functional resin has been reduced by approximately 45℃*2 compared to the conventional EA toner, contributing to lower power consumption when fusing.
- *1: The new toner is introduced to Apeos C3067 / C3061 series currently (as of March 2025). We plan to introduce the new toner to the upcoming new products as well in the future.
- *2: Fusing temperature of each toner is evaluated under the same condition for comparison (Printing speed: 175㎜/s, fuser: IH fuser). Evaluation conditions, such as paper and voltage, are based on the products for the Japanese market. The above chart shows the fusing temperatures in increments of five degrees based on the averages calculated from the various actual measurement data, and the fusing temperatures may differ from those on the actual machine.
- Apeos C3067
- Apeos C3061 Series
- Apeos 3061 Series
High-quality printed materials are produced by correcting cyan, magenta, yellow, and black color shift and performing high-precision correction of front-to-back misregistration.
Minimizes unnecessary paper consumption caused by color shifts or image misalignment.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series*1
- Apeos C7070 Series*1
- Apeos C3067*1
- Apeos C3061 Series*1
- Apeos C2360 Series*1
- ApeosPort C7070 R Series*1 *2
- ApeosPort-VII C7773 R Series*1 *2
- ApeosPort-VI C7771 RC Series*1 *2
- Apeos C5240*1
- Apeos C4030 Series*1
- Apeos C320 z*1
- ApeosPrint C5570 Series*1
- ApeosPrint C5240*1
- ApeosPrint C4030 Series*1
- ApeosPrint C320 dw*1
- Note: Product lineup varies depending on country/region.
- *1 Color shift correction is supported (correction of front-to-back misregistration is not supported).
- *2 This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
Produces high resolution output with LED print head. Sharp, high-definition output quality allows for worry-free use for documents where image quality is important.
- *1: For ApeosPro C810 / C750 / C650 and Apeos C8180 / C7580 / C6580
Utilizes an LED array, where many small LEDs are arranged in a row as the light source. Power consumption during output is reduced by approximately 57%*2 compared to the conventional laser method.
- *2: Comparison between Apeos C2360 / C2060 and a conventional product of the same class prior to this technology.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*
- ApeosPort-VII C7773 R Series*
- ApeosPort-VI C7771 RC Series*
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos 1860
- Apeos C5240
- Apeos C4030 Series
- Apeos C320 z
- Apeos 6340
- Apeos 5330
- ApeosPrint C5570 Series
- ApeosPrint C5240
- ApeosPrint C4030 Series
- ApeosPrint C320 dw
- ApeosPrint 4560 S Series
- ApeosPrint 6340
- ApeosPrint 4830 Series
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
Real-time image quality adjustments are possible while printing, enhancing productivity. This eliminates the need to halt printing for adjustments, unlike conventional methods.
Prevents quality loss due to abnormal density or print misalignment, and reduces unnecessary paper usage.
- ApeosPro C810 Series
- Apeos C8180 Series
- Note: Product lineup varies depending on country/region.
Corrects color fluctuations in printed materials caused by deterioration of parts. It can also control multi-primary colors, such as skin tones, which are layered single colors (CMYK), and always reproduce the same color in a stable manner.
Prevents quality loss due to abnormal density or print misalignment, and reduces unnecessary paper usage.
- ApeosPro C810 Series*
- Note: Product lineup varies depending on country/region.
- * Feature of GP Controller D01
By simply scanning past printed materials for color reference, new printed materials can be output with the same color tone. Printed materials in the required colors can be produced quickly and easily.
Eliminates the need for repeated proofing and color matching for color reproduction, and reduces the amount of paper used.
- ApeosPro C810 Series*
- Note: Product lineup varies depending on country/region.
- * Feature of GP Controller D01
High-precision correction is performed to ensure the colors of the proofing data when displayed on the monitor match the colors of the actual printed material. You can check the colors on the monitor, which greatly streamlines the proofing work.
Eliminates the need to print and transport documents for color verification, thereby reducing both paper usage and transportation needs.
- ApeosPro C810 Series*
- Note: Product lineup varies depending on country/region.
- * Feature of GP Controller D01
Printing is enabled when the user performs an authentication on the MFP. This prevents printed materials from being taken away, thereby protecting important information.
- *: IC card authentication is optional. (Authentication by user ID and password is a standard feature)
Even if you send a print job by mistake, it is not output immediately, so you can delete it on the MFP and prevent misprints.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*
- ApeosPort-VII C7773 R Series*
- ApeosPort-VI C7771 RC Series*
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos 1860
- Apeos C5240
- Apeos C4030 Series
- Apeos C320 z
- Apeos 6340
- Apeos 5330
- ApeosPrint C5570 Series
- ApeosPrint C3560 S Series
- ApeosPrint C5240
- ApeosPrint C4030 Series
- ApeosPrint C320 dw
- ApeosPrint 4560 S Series
- ApeosPrint 6340
- ApeosPrint 4830 Series
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
A pale green light indicates the presence of printed documents or originals. Reduces the risk of information leakage.
Reduces the amount of paper waste through eliminating unintended and uncollected printed documents.
- ApeosPro C810 Series*1
- Apeos C8180 Series*1
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067*2
- Apeos C3061 Series*2
- ApeosPort C7070 R Series*3 *4
- ApeosPort-VII C7773 R Series*3 *4
- Apeos 7580 Series*1
- Apeos 4570 Series
- Apeos 3061 Series*2
- Note: Product lineup varies depending on country/region.
- *1 Document feeder only
- *2 Only when Finisher-A3 (Optional) is installed.
- *3 Center tray only
- *4 This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
Allows remote monitoring of device status at all times. The status of supplies and parts are monitored and delivered or replaced when necessary, ensuring stable operation without any hassle to the administrator.
- 1: Electronic Partnership Broadband
- Note: Service offerings may vary depending on the country/region.
Utilization of device information can optimize engineer visits for repairs and inspections, thereby reducing CO2 emissions due to travel. In fiscal year 2022, we reduced CO2 by approximately 404 tons*2.
- *2: Calculated by our company based on the reduction in number of visits by our engineers in Japan in 2022 and the automobile fuel consumption announced by the Ministry of Land, Infrastructure, Transport and Tourism.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*
- ApeosPort-VII C7773 R Series*
- ApeosPort-VI C7771 RC Series*
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos 1860
- Apeos C5240
- Apeos C4030 Series
- Apeos 6340
- Apeos 5330
- ApeosPrint C5570 Series
- ApeosPrint C3560 S
- ApeosPrint C5240
- ApeosPrint C4030 Series
- ApeosPrint 4560 S Series
- ApeosPrint 6340
- ApeosPrint 4830 Series
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
Since the paper can be bound without staples, it can be safely used at sites or industries that require caution against injury and contamination by foreign matter.
- *1: Optional.
Since no disposal of staples is required, it contributes to the waste reduction*2 in customers' offices.
- *2: Based on the results of staple-free stapling used in the Apeos C7070 series and Apeos C8180 series installed at customers' sites in Japan (September 2022 to March 2023), the number of staples reduced is approximately 180,000, or 6.8 kg when converted to weight.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- ApeosPrint C5570 Series
- Note: Product lineup varies depending on country/region.
Simply select the document type, and the scanned document is directly stored in a predetermined destination with a file name according to predefined rules. Efficiency can also be improved through automated standardization of tedious tasks.
- *: Optional
Various paper documents can be scanned, digitized, stored, and utilized, thereby reducing the amount of paper used. This also saves power by reducing the amount of PC work required after scanning.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067*1
- Apeos C3061 Series*2
- Apeos C2360 Series
- ApeosPort C7070 R Series*3
- ApeosPort-VII C7773 R Series*3
- ApeosPort-VI C7771 RC Series*3
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos C5240
- Apeos C4030 Series
- Apeos 6340
- Apeos 5330
- Note: Product lineup varies depending on country/region.
- *1 Scan Delivery Light is installed as a standard feature. You can upgrade to Scan Delivery via the Scan Delivery Upgrade Kit option.
- *2 For Apeos C2061, you can upgrade to Scan Delivery with the Scan Delivery Light and Scan Delivery Upgrade Kit options.
- *3 This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
An electronic desk reproduced on a PC with viewer and editing tool consistently supports a series of document-handling tasks, increasing efficiency and productivity.
Share documents electronically instead of printing on paper. Note pasting and stamps can be handled on an electronic desk just like paper, leading to reduced paper usage.
Received faxes can be automatically sorted* as configured in advance without printing, and viewed electronically. You can respond to urgent faxes regardless of the location, such as offsite or at home.
- *: Requires optional "Paperless Fax Delivery Kit". Not supported by Apeos 1860 and Apeos C320 z
Paper usage can be reduced as compared to printing received faxes. The need to come to the office for fax-related work is eliminated, and CO2 emissions due to travel can be reduced.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*
- ApeosPort-VII C7773 R Series*
- ApeosPort-VI C7771 RC Series*
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos 1860
- Apeos C5240
- Apeos C4030 Series
- Apeos C320 z
- Apeos 6340
- Apeos 5330
- Note: Product lineup varies depending on country/region.
- * This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
We provide an optimal print environment with high quality and security regardless of the location, whether it is your own headquarters, branch office, factory or warehouse office, as well as an offsite coworking space or shared office.
Remote work is more accessible because printing can be done on nearby MFPs, such as at a company's worksite near home. Contributes to reducing CO2 emissions from travel to and from work.
The usage status of MFPs can be visualized in the cloud. Usage data can be easily aggregated and referenced in various forms such as by device, user, or department, reducing the burden on the device administrators. This contributes to TCO reduction in offices.
The MFP's control panel displays usage status when a user prints, showing the number of sheets printed by each individual and allowing comparisons within the organization. This feature helps raise cost awareness among users and contributes to reducing paper consumption.
- ApeosPro C810 Series
- Apeos C8180 Series
- Apeos C7071 Series
- Apeos C7070 Series
- Apeos C3067
- Apeos C3061 Series
- Apeos C2360 Series
- ApeosPort C7070 R Series*1
- ApeosPort-VII C7773 R Series*1
- ApeosPort-VI C7771 RC Series*1
- Apeos 7580 Series
- Apeos 4570 Series
- Apeos 3061 Series
- Apeos 3060 Series
- Apeos C5240
- Apeos C4030 Series
- Apeos 6340
- Apeos 5330
- Note: Product lineup varies depending on country/region.
- *1: This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
- Note: For the latest operating environment and limitations, please refer to the product page of FUJIFILM IWpro or contact your sales representative.
By managing MFPs and their users' information, it is easy to print from any device available at that time and display menus tailored to the user. It is also easy to link with the cloud and mobile devices.
Unique print rules can be applied, such as automatically printing on both sides of the paper under certain conditions. It also makes it easier to control paper usage, such as by raising awareness through visualization of the output volume.
Visualizes the usage status in MFPs and proposes an optimal output environment, including device placement. We support efforts to reform work styles, such as digitization.
You can check the status of paper and power savings at the company-wide, departmental, and individual levels, which helps when planning future environmental initiatives.
- Note: Service offerings may vary depending on the country/region.
From fault handling to MFP setting changes, the support provided by our experts will lighten your IT workload. IT staff will be freed from operational and administrative tasks, making it easier to work on improving the IT environment, which will lead to the first step toward DX for customers.
IT staff visits to sites for maintenance and troubleshooting are reduced, thereby reducing CO2 emissions due to travel. In addition, visualization of IT assets reduces unnecessary equipment purchases, contributing to resource conservation.
- Note: Service offerings may vary depending on the country/region.
At FUJIFILM Business Innovation, we are committed to contributing to the circular economy through our products in order to use limited resources effectively.
- Note: The content of this web page pertains to the Japanese market and is based on products and solutions available in Japan. Product lineup varies depending on country/region.
To reduce environmental impact through reuse and recycling technologies, we offer remanufactured machines as new devices that we guarantee the same quality as newly built machines.
A remanufactured product is created with the concept that "used products are valuable resources, not waste." For the ApeosPort-VII C R series*1*2, we evaluate whether to reuse the MFPs and components collected from customers based on each device's use history, adhering to predefined standards. Worn or consumed parts are replaced, while reusable parts are disassembled, cleaned, and reassembled. Each remanufactured unit undergoes the same inspection process as newly built machines, ensuring quality and reliability as a new product. By achieving a parts reuse rate (by weight) of up to 84%*3, we reduce CO2 emissions by 53%*4 over the entire product lifecycle (including procurement, manufacturing, transportation, use, and disposal) compared to newly built machines. This initiative supports resource recycling and addresses climate change.
The series utilizes Super EA-Eco toner, featuring one of the smallest toner particle sizes in the industry. It offers high-resolution output of 1,200 x 2,400 dpi and a fusing temperature approximately 10℃ lower than conventional toner, resulting in lower power consumption.
Smart WelcomEyes, which detects user presence to automatically exit sleep mode, combines "energy saving" with "ease of use." The "Instant Heating IH-Fuser"*5 enables recovery from sleep mode in less than 5 seconds, providing low power consumption while ensuring immediate availability when needed.
Additionally, the MFP supports various printing needs, including lightweight or heavyweight paper and long paper*6, while facilitating smooth digitization of paper documents and integration with solutions for diverse work styles. Enhanced value-added functionality helps customers improve business efficiency.
- *1 : This product is a remanufactured Fuji Xerox brand product. Xerox, the Xerox logo, and the Fuji Xerox logo are registered trademarks or trademarks of Xerox Corporation in the United States.
- *2 : ApeosPort-VII C7773 R / C6673 R / C5573 R / C4473 R / C3373 R / C2273 R are available in the Japanese market, and ApeosPort-VII C5573 R and ApeosPort-VII C3373 R are available in the Asia Pacific market.
- *3 : Maximum design value.
- *4 : CO2 emissions throughout the entire product lifecycle, including manufacturing, transportation, and customer use etc. When comparing ApeosPort-VII C3373 R for the Japanese market and ApeosPort-VII C3373 for the Japanese market.
- *5 : Instant Heating IH-Fuser is used in ApeosPort-VII C2273 R, C3373 R, C4473 R, and C5573 R in the Japanese market, and used in ApeosPort-VII C3373 R in the Asia Pacific market.
- *6 : Only supported by the Windows version of ART EX driver and Adobe® PostScript® 3™ driver in Japan.Only supported by the PCL driver and the Windows version of Adobe® PostScript® 3™ driver in the Asia Pacific market.
By designing products with the focus on miniaturization and weight reduction, we reduce the amount of resources used.
By designing MFPs and pritners to be as compact and lightweight as possible, we are working to reduce the amount of materials, energy, and other resources used in manufacturing and distribution.
With Apeos C320 z*1, reducing the number of parts and reviewing the design have resulted in a smaller main unit. Compared to the conventional model, the weight of the main unit has been reduced by approximately 30% and the volume by approximately 40%. Furthermore, we were able to reduce the transportation packaging materials by 40.8% by mass, and CO2 emissions associated with packaging material production by approximately 40%*2. As a result, the number of units that can be loaded in a shipping container has doubled*3, contributing to the reduction of CO2 emissions during transportation.
With the release of the Apeos C3067 and Apeos C3061 series*4 in October 2024, we have achieved a reduction in body weight while maintaining strength by optimizing resin and sheet metal use through thinning technology and revising the frame structure. The total mass of the Apeos C2061 (Model-PFS-1T) is approximately 8.8% less*5 compared to the conventional Apeos C2060 (Model-PFS-1T). This also contributes to a reduction in CO2 emissions during logistics.
- *1 : Apeos C320 z is for the Japanese market, Apeos C325 z is for the Asia Pacific market.
- *2 : Calculated independently by our company.
- *3 : When loaded in a 40-foot high cube container.
- *4 : The Apeos C3067 and Apeos C3061 series are for the Japanese market. The Apeos C3567 series / Apeos C3061 series are for the Asia Pacific market.
- *5 : Figure includes the mass of toner cartridge. For the Asia Pacific market, reduction is 10% for Apeos C3061 / C2561 / C2061 Model-CPS-ST with 4 Tray configuration, compared to the previous model Apeos C3060 / C2560 / C2060 Model-CPS with 4 Tray configuration, including toner.
We use recycled plastics in our products with the aim of reducing new resource inputs.
We use recycled plastics in multifunction device parts, such as front doors and paper trays, to reduce the need for new resources. In the Apeos C3067 and Apeos C3061 series*1, released in October 2024, recycled plastics account for at least 15%*2 of the total device weight. We have addressed challenges in minimizing color inconsistencies in recycled plastic, which is often difficult to mold. Additionally, by improving the strength and rigidity of the parts, we ensure the overall quality of the product.
- *1 : The Apeos C3067 and Apeos C3061 series are for the Japanese market. The Apeos C3567 series / Apeos C3061 series are for the Asia Pacific market.
- *2 : 4 Tray configuration with Duplex Automatic Document Feeder
With recycling in mind, we design products that are easy to disassemble, clean and sort.
To promote future recycling, the Apeos C3067 and Apeos C3061 series*1, released in October 2024, introduce new product design that facilitates easy disassembly, cleaning, and sorting, thanks to improvements in part shapes and configuration. The exterior covers are now designed to be removed as a single frame, rather than requiring individual removal for each functional unit. Additionally, the front cover is flat with fewer grooves, making it easier to clean.
- *1 : The Apeos C3067 and Apeos C3061 series are for the Japanese market. The Apeos C3567 series / Apeos C3061 series are for the Asia Pacific market.
- *2 : Ratio of shipments with products using reused parts to the total number of shipments in Japan (April 2023 to March 2024)
We have developed a drum with an extended lifespan. The aim is to save resources by reducing the frequency of replacement as much as possible.
The long-life drum* uses a material that does not easily deteriorate due to wear.
This results in less frequent drum replacement, which not only saves resources but also realizes the added value of maximizing equipment uptime.
- * A drum is a component that creates a toner image by depositing toner on its surface, which corresponds to the original document.
We contribute to the promotion of resource recycling through efforts to reuse containers and parts such as used toner cartridges and waste toner containers.
Since the 1990s, we have been collecting and reusing containers and parts such as used toner cartridges and waste toner containers, and have contributed to the cumulative reduction of 36 kt*1 in new resource inputs. The usage rate of reused parts for toner cartridges in our main products in Japan is approximately 45% by volume*2, and the usage rate of reused parts for waste toner containers is approximately 55% by volume*2.
- *1 : Cumulative amount of new resource input reduction through reuse of toner cartridges, waste toner containers, and drum cartridges in Japan and AP regions since 1990s (as of March 31, 2024)
- *2 : Ratio of shipments with products using reused parts to the total number of shipments in Japan (April 2023 to March 2024)
FUJIFILM Business Innovation discloses and reports environmental information about its products in various forms.
- Note: The content of this web page pertains to the Japanese market and is based on products and solutions available in Japan. Product lineup varies depending on country/region.