Select Your Location

This is Fujifilm Myanmar website.
To browse products and services available in your area,
please choose another country or region.

See all countries and regions

You are accessing from the United States. To browse Fujifilm USA website, please click the following link.

Fujifilm USA Website
[photo] FP-Z8000 Projector

Projector - Support

World´s first projector with rotating high-spec FUJINON lens for projections from short distance in various directions.

Spec Sheet

Manual

FP-Z8000/FP-Z6000

Operation manual (HTML)

You can see the operation manual.

[video] Operation Manual for FP-Z8000 projector

Operation manual (PDF)

You can download the operation manual.

Cover of detailed instruction manual

Basic manual (PDF)

You can download the basic manual.

[PDF] Operation Manual for FP-Z8000 projector

Projector FP-Z5000

Operation manual (HTML)

You can see the operation manual.

[video] Operation Manual for FP-Z5000 projector

Operation manual (PDF)

You can download the operation manual.

Cover of detailed instruction manual

Basic manual (PDF)

You can download the basic manual.

[video] Basic Manual for FP-Z5000 projector

Software

Warping and Blending Tool and the USB drive Ver1.16

For the operation of the "Warping and Blending Tool and the USB driver Ver1.16", please refer to the description in the Operation manual of Z8000/Z6000.

ZIP: 10.5MB

Using the Warping and Blending Tool-Blending (Edge Blending)

Using the Warping and Blending Tool-Warping (Geometric Correction)

This software is compatible with only FP-Z8000.

  • * It is not supported for FP-Z6000 and FP-Z5000.
  • * Please extract the downloaded zip-file and install the software (Warping and Blending Tool 1_1.16.exe).
  • * Please also be sure to install the driver (CDM21224_Setup.exe) included in the zip-file so that your PC can recognize FP-Z8000.

FUJIFILM PROJECTOR CONTROLER ver1.0.5

ZIP: 289KB

This software is to control the projector via a network.

Display screen when operating software.

When using this software with the FP-Z8000, it is compatible with firmware version 1.06 or later. The FP-Z6000 is compatible with all versions.

  • * The FP-Z5000 is not compatible.

FUJIFILM PROJECTOR MANAGEMENT TOOL ver1.0

This application enables network monitoring of the operating status of Z projectors in real time.
Registration of up to 255*1 Z projectors on the network and centralized management from a single PC via the network is possible.

  • * Not guaranteed to work in all network settings.
  • *1 Depends on PC and network conditions.

ZIP: 12.1MB

When using this software with the FP-Z8000/FP-Z6000, the firmware version should be 2.00 or later.
To use this software, you must install “FUJIFILM PROJECTOR CONTROLER” beforehand.

  • * The FP-Z5000 is not compatible.

Manual

For specific installation instructions of FUJIFILM PROJECTOR MANAGEMENT TOOL, refer to the following manual (PDF) .