Malta

FCR PRIMA Tm

A smallest class all-in-one tabletop CR equipped with mammography image reading as standard.

The content on this page is intended to healthcare professionals and equivalents.

Standard Components

FCR PRIMA Tm (Model : CR-IR 392)

Applicable Console

Console Advance

Main Connectable Imagers

DRYPIX Smart, DRYPIX EDGE

Supplies : Imaging Plate

ST-VI (standard type)
35×43 cm (14”×17” ) , 35×35 cm (14”×14” ) , 10”×12” ,
8”×10” , 24×30 cm, 18×24 cm, 15×30 cm

HR-VI (high-resolution type)
24×30 cm, 18×24 cm

Supplies : IP Cassette

Type CC
35×43 cm (14”×17” ) , 35×35 cm (14”×14” ) , 10”×12” ,
8”×10” , 24×30 cm, 18×24 cm, 15×30 cm

Type CH
24×30 cm, 18×24 cm

Type LC
35.4×124.5 cm, 35.4×101.7 cm, 35.4×83.0 cm,
25.2×58.0 cm, 24.0×57.0 cm

Time Required for IP Feed/Load

Min. 49 sec.

Processing Capacity

Up to 73 IPs/hr.

Reading Specification

10 pixels /mm, 5 pixels /mm, 20 pixels /mm

Time to Start on Display

Min. 33 sec.

Time to Print on DRYPIX Smart

Approx. 165 sec. (Approx. 155 sec.)*1
in case of 35×43 cm (14”×17”)

Number of Stacker

1

Network

10 Base T/100 Base TX

Dimensions (W×D×H)

560×540×392 mm (22”×21”×15”)

Weight

39 kg (86 lbs.)

Power Supply Conditions

Single phase 50-60 Hz
AC120-240V ±10% 1.9A (max)

Environmental Conditions

Operating Conditions:

  • Temperature: 15-30°C
  • Humidity: 15-80%RH (No dew condensation)
  • Atmospheric pressure: 750-1060hPa
  • *1 In the high speed mode