Enhanced processing capacity — leads to smoother operation
A simple reader unit but with proven image quality and durability, offering a processing capacity twice that of the FCR PRIMA.
FCR PRIMA II is one of the most compact and lightweight reader units on the market. The required space is comparatively smaller than other similar table-top systems and can be installed in any open space. Another advantage of this unit is that you don't need a darkroom any longer.
The new model FCR PRIMA II now offers enhanced processability with speed of up to 55 IPS/hr., almost double FCR PRIMA's 29 IPS/hr., yet leaving the easy operability and high functionality intact. As a result, the patient handling time at clinics and hospitals is reduced significantly leading to smoother operation and increased patient turnover.
Although this is a compact machine its excellent image quality is the same as that produced by the rest of the FCR range. Image Intelligence™, Fujifilm's proprietary image processing technology, enhances image contrast and sharpness, without any deterioration of details. FCR PRIMA T supports accurate diagnosis by offering stable and optimized image quality.
Enhances FCR images. All diagnostic scopes will be enhanced except for noise.
Provides a non-grainy image by mainly isolating and suppressing the noise for the signal.
Removes the stationary grid patterns thus preventing Moiré from being generated resulting in easier diagnosis.
FCR PRIMA Console and FCRView are an all-in-one viewers that turns your desktop into a multi-function workstation for all your radiographic imaging needs. You can initiate exposures, process and print your studies and backup patient information all within a single unit.
Standard Components | FCR PRIMA II Image Reader (Model: CR-IR 391RU) AC power cord |
---|---|
Other System Components | IP cassette type CC FCR PRIMA Console, FCRView Dry Imager: DRYPIX PRIMA, DRYPIX 2000, 7000, Plus |
Supplies |
|
Time Required for IP Feed / Load | Minimum 66 sec. |
Processing Capacity | Up to 55 IPs/hr. |
Reading Specification | 10 pixels / mm |
Time to Start on Display | Minimum 33 sec. |
Time to Print on DRYPIX PRIMA | Approx. 165 sec. in case of 35 × 43 cm |
Number of Stacker | 1 |
Network | 10 Base T / 100 Base TX |
Dimensions (W × D × H) | 600 × 400 × 780 mm (24″ × 16″ × 31″) |
Weight | 70 kg (155 lbs.) |
Power Supply Conditions | Single phase 50 - 60 Hz AC 100 - 240 V ±10% 5 A (max.) |
Environmental Conditions |
|