This website uses cookies. By using the site you are agreeing to our Privacy Policy.



X-A5 Camera Body Firmware Update Ver.1.20

Please read the followings and update the firmware.

Notes

  • · We temporarily removed the FUJIFILM X-A5 firmware Ver.1.20 released on Aug 30 2018 from the site.
    Please wait for a while until restarting.
  • · Please read this update after refreshing this page.
    • * In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the "Control" key and "F5" key.
    • * In case of Mac (Safari / Google Chrome), hold down the "Command" key and "R" key.
    • * In case of Mac (FireFox), hold down the "Command", "Shift" and "R" keys at same time.
  • · The firmware upgrade is not required if its version is 1.20.
    • * Refer to "2) Firmware version checking procedure" in the "Detail of firmware update steps" below to check the firmwawre version.
  • · Please use your camera and lens with the latest version of firmware.
    (If you don't use them with the latest version, you may not enjoy their full performance.)

Detail of the update

The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:

  • 1. Advanced Filters “Rich & Fine” and “Monochrome [NIR]”
    “Rich & Fine” filter is recommended for food and other tabletop photography. It simulates brighter and more vivid colors at the center of the image and adds slight shadow at the four corners to emphasize the subject. “Monochrome [NIR]” simulates Monochrome effect as taken by near-infrared cameras. These modes will allow photographers to add additional artistic flair or film-like color tones to their photos.
  • 2. SQUARE MODE
    The “SQUARE MODE” allows users to switch to 1:1 format with a single flick on the touchscreen. The “SQUARE MODE” enhances compatibility with social media networks where 1:1 format has become the standard image format for posting photos.
  • 3. Improvement of AF accuracy when pressing the shutter button halfway in AF-C mode.
  • 4. The phenomenon is fixed that the highlight warning doesn’t appear in the Info display.
  • 5. Fix of slight defects.

Firmware update history(up to version 1.10)

Firmware update steps

Summary of firmware update steps

  1. 1. Check the firmware version.
  2. 2. Prepare a formatted memory card.
  3. 3. Download the firmware and copy it to the card.
  4. 4. Put the memory card with the firmware in the camera and update it.

Detail of firmware update steps

Please refer to the steps below about necessities and steps for firmware update.

Precaution

  • 1.If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
  • 2.Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
  • 3.You can update the firmware from old version directly to the latest one.
  • 4.Firmware updating requires approximately 90 seconds.
  • 5.Once the firmware has been updated, some data of the previous version cannot be restored.
  • 6.Please check here if you encounter any problems.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.