This website uses cookies. By using the site you are agreeing to our Privacy Policy.



X-T3 Camera Body Firmware Update Ver.2.00

Please read the followings and update the firmware.

Notes

  • · Please read this update after refreshing this page.
    • * In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the "Control" key and "F5" key.
    • * In case of Mac (Safari / Google Chrome), hold down the "Command" key and "R" key.
    • * In case of Mac (FireFox), hold down the "Command", "Shift" and "R" keys at same time.
  • · The firmware upgrade is not required if its version is 2.00.
    • * Refer to "2) Firmware version checking procedure" in the "Detail of firmware update steps" below to check the firmware version.
  • · Please use your camera and lens with the latest version of firmware.
    (If you don't use them with the latest version, you may not enjoy their full performance.)
  • · The firmware of a camera paired with a smartphone can be updated via the smartphone and a tablet.

Detail of the update

The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues:

* Regarding the new function "Recording over 4GB movie file as one file" which was planned to add to the firmware Ver.2.00, we will announce the schedule to release the firmware with the function in January 2019.

Regarding the details of No.1,3 and 6 download the "X-T3 New Features Guide" from our website.
  • 1. 4K HDR video recording in Hybrid Log Gamma (HLG)
    Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards (*1). It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
    *1:Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.
  • 2. Simultaneous output of Film Simulation and F-Log footage (*2)
    Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
    *2:Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode. Also, cannot choose different image size (4K/FHD) for HDMI output and internal SD card recording.
  • 3. Display color temperature (Kelvin) on EVF/LCD Color temperature (Kelvin) can be displayed on EVF/LCD.
  • 4. Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P (*4) Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. *4:Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD Long GOP recording. For detail, refer to the Shutter Speed in the “Movie Recording Mode” list.
  • 5. Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
    Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
  • 6. Display power supply icon
    Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD (*5) and Anker PowerCore Speed 20000 PD (*6).
    *5:Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
    *6:Product may not be available on your country.
  • 7. Fix of slight defects.

Firmware update history(up to version 1.02)

Firmware update steps

Summary of firmware update steps

  1. 1. Check the firmware version.
  2. 2. Prepare a formatted memory card.
  3. 3. Download the firmware and copy it to the card.
  4. 4. Put the memory card with the firmware in the camera and update it.

Detail of firmware update steps

Please refer to the steps below about necessities and steps for firmware update.

Precaution

  • 1.If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
  • 2.Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
  • 3.You can update the firmware from old version directly to the latest one.
  • 4.Firmware updating requires approximately 90 seconds.
  • 5.Once the firmware has been updated, some data of the previous version cannot be restored.
  • 6.Please check here if you encounter any problems.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software ("FIRMWARE"). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. ("FUJI") already distributed to you included with FUJI's product(s) ("ORIGINAL FIRMWARE"). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.