Switzerland

FDR go flex

Transform your mobile analog X-ray units into digital radiography systems
quickly and easily with the FDR Go flex

The content on this page is intended to healthcare professionals and equivalents.

Standard Components
Digital radiography: DR-ID 700AU
(1) DR-ID 700AC
(2) Flat panel sensor
(2)-1 DR-ID 601SE [GOS/wireless /35x43cm (14” x 17” )]
Component name: FDR D-EVO G35i
(2)-2 DR-ID 602SE [GOS/wireless /43x43cm (17” x 17” )]
Component name: FDR D-EVO G43i
(2)-3 DR-ID 611SE [CsI /wireless /35x43cm (14” x 17” )]
Component name: FDR D-EVO plus C35i
(2)-4 DR-ID 612SE [CsI /wireless /43x43cm (17” x 17” )]
Component name: FDR D-EVO plus C43i
(2)-5 DR-ID 613SE [CsI /wireless /24x30cm]
Component name: FDR D-EVO plus C35i
Console: Console Advance (Mobile)
DR-ID􀀁300CL Ver. 7.3 or later
Reading grayscale level

16 bits /pixel

Pixel pitch

0.15mm

Pixels

DR-ID 601SE: 2880 x 2304 pixels
DR-ID 602SE: 2816 x 2816 pixels
DR-ID 611SE: 2880 x 2304 pixels
DR-ID 612SE: 2816 x 2816 pixels
DR-ID 613SE: 1920 x 1536 pixels

Precautions related to grid

10 pixels /mm, 5 pixels/mm*2

Time to Start on Display

It is recommended to use the grid with 40 lines/cm.

Image processing

Spatial Frequency Processing
Gradation Processing
Dynamic Range (DR) Compression Processing
Multi-Objective Frequency Processing (Optional)
Flexible Noise Control
*The image processing by CONSOLE ADVANCE

Connection

Console connection:

IEEE 802.11n (5.2GHz band ) or
IEEE 802.3 (100BASE-TX)

SE (Flat Panel Sensor) connection:

IEEE 802.11n (5.2GHz band)

In-hospital network connection: wire/wireless is available
(Depending on in-hospital network environment)

Image preview

Approx. 2sec ( Standard mode )

Cycle time

DR-ID 601SE/DR-ID 602SE/DR-ID 611SE/
DR-ID 612SE/DR-ID 613SE:
Approx. 14sec (standard mode)

External size (W x D x H)

DR-ID 700AC: 146 x 76 x 43mm
AP by Fujifilm: 39 x 95 x 27mm
Flat panel sensor:
DR-ID 601SE: 460 x 384 x 15mm (Approx.) [18” x 15” x 0.6”]
DR-ID 602SE: 460 x 460 x 15mm (Approx.) [18” x 18” x 0.6”]
DR-ID 611SE: 460 x 384 x 15mm (Approx.) [18” x 15” x 0.6”]
DR-ID 612SE: 460 x 460 x 15mm (Approx.) [18” x 18” x 0.6”]
DR-ID 613SE: 328 x 268 x 15mm (Approx.) [13” x 11” x 0.6”]
Console: 285 x 212 x 22mm (Approx.) [11” x 8” x 1”]
*The external dimensions do not include projections.

Weight

DR-ID 700AC: 0.51kg [1lbs.]
AP by Fujifilm: less than 0.1kg
Flat panel sensor:
DR-ID 601SE: 3.3kg [7lbs.] (including battery)
DR-ID 602SE: 4.0kg [9lbs.] (including battery)
DR-ID 611SE: 3.6kg [8lbs.] (including battery)
DR-ID 612SE: 4.2kg [9lbs.] (including battery)
DR-ID 613SE: 1.9kg [4lbs.] (including battery)
Console: 1.4kg [5lbs.]
*The weight does not include that of the strap.

Power supply conditions

DR-ID 700AC:
Single phase 50-60Hz
AC100-240V 125VA or less


Console:
Single phase 50-60Hz
AC100-240V


Battery Charger:
Single phase 50-60Hz
AC100-240V 100VA or less

Optional parts:

DR601 SE Battery charger
DR601 SE Battery
AP by Fujifilm