Cookies are important to the proper functioning of a site. To improve your experience, we use cookies to remember log-in details and provide secure log-in, collect statistics to optimize site functionality and deliver content tailored to your interest.
By continuing to use this site you are giving us your consent to do this. For more information you can read our Privacy Policy.





  1. Film ejection slot
  2. Power button/LED
  3. Strap holes


  1. Reset button*1
  2. Micro USB port


  1. Film door lock
  2. Film door
  • *1 If the printer does not work properly, press the reset button to reset the printer.


Recording method

3-color exposure with OLED

Film used

FUJIFILM INSTAX WIDE Instant Film (sold separately)

Number of Prints

10 per pack

Image size

86mm x 108mm Picture Size 62mm x 99mm

Supported image size

800 × 1260 dots

Printing resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels

256 levels per color (RGB)


Standard compliance: Bluetooth Ver. 4.2 (BLE)

Supported image format


Printing time

Image recording - photo output (fed out): Approximately 12 sec.

Approximate printing capacity

Approximately 100 prints (from full charge)

  • * The number of prints depends on the usage conditions.
Power supply

Lithium ion battery (internal type: not removable)

Charging time

Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level)

Power consumption

Approximately 3 W

Operating environment

Temperature: +5 ºC to +40 ºC Humidity: 20% to 80% (no condensation)


39 mm × 127.5 mm × 33.7 mm/5.5 in. × 5 in. × 1.3 in. (excluding projecting parts)


Approximately 340 g / 12 oz (excluding film pack)

Supplied accessory

USB cable (BOD700-101, Length: 30 cm) , Stand (1) , Strap (1)

  • Simulated Image. Development time approx. 90 sec.
  • The instax prints depicted are for illustrative purposes only.
  • The above specifications are subject to change for performance improvement.
  • The colors of actual products might differ somewhat from products in the catalog due to the nature of printing.
  • The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
  • The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.
  • The image size may affect sharpness and graininess of the finished print.
  • Depending on the file size and smartphone type, wireless communication may take a long time.
  • The Smartphone type and shooting condition may affect the color tone and quality of the finished print.
  • The finished print may look different from the image viewed on the Smartphone display.
  • The Smartphone screen images are simulated.
  • QR code depicted is for illustrative purposes only.