INSTAX MINI LINK®：Specifications

Recording method: 3-color exposure with OLED
Film Used: FUJIFILM INSTAX Mini Instant Film (sold separately)
Number of films: 10 films/pack
Film size: 86 mm x 54 mm
Image size: 62 mm x 46 mm / 2.4 in. x 1.8 in.
Supported image size: 800 × 600 dots
Printing resolution: 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels: 256 levels per color (RGB)
Interface: Standard compliance: Bluetooth Ver. 4.2 (BLE)
Supported image format: JPEG, PNG, HEIF
Printing time: Image recording - photo output (fed out):Approximately 12 sec.
Approximate printing capacity: Approximately 100 prints (from full charge)
*The number of prints depends on the usage conditions.
Power supply: Lithium ion battery (internal type: not removable)
Charging time: Approximately 80 to 120 minutes(Charging time depends on the temperature and battery remaining level)
Power consumption: Approximately 3 W
Operating environment: Temperature: +5°C to +40°C (+41°F to +104°F)
Humidity: 20% to 80% (no condensation)
Main unit dimensions: 90.3 mm x 34.6 mm x 124.5 mm /
3.5 in. x 1.3 in. x 4.9 in.(excluding projecting parts)
Main unit mass: Approximately 209g / 7.3oz (excluding film pack)
Supplied accessory: USB cable

The INSTAX prints depicted are for illustrative purposes only.
The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
The image size may affect the sharpness of the finished print.
Depending on the file size and smartphone type, wireless communication may take a long time.
The smartphone type and shooting condition may affect the color tone and quality of the finished print.
The finished print may look different from the image viewed on the smartphone display.
All images of prints and smartphones are simulated.

INSTAX MINI LINK^®