Spain

SCENARIATM View

The 64ch/128slice CT system provides images with excellent visibility - even at low doses.

The content on this page is intended to healthcare professionals and equivalents.

Intelli IPV

Our iterative reconstruction method, Intelli IPV*1, provides images which maintain their natural texture even at high noise reduction rates and their excellent visibility even at low doses, and does not require a dedicated operation room or additional hardware.
Furthermore, by applying a low dose, the anode heat capacity is equivalent to 45 MHU (converted value).

  • *1 IPV stands for Iterative Progressive reconstruction with Visual modeling.

Achieving natural visibility with dose reduction

  • *2 Scanning the lung field

While adjusting the texture at a uniform ratio from high frequency to low frequency, the physical properties that affect visibility are made as close as possible to FBP.

Visual Model

The Visual Model is a technology that controls image noise and image quality by iterative processing based on statistical model, object model, and physics model.

Object Model
Models morphological information changes to control the size, shape and position of a structure.

Physics Model
The Physics Model is a technology that uses FBP as a model and reduces noise while adjusting the texture from high frequencies to low frequencies at a uniform ratio, achieving a texture close to that of FBP.

Statistical Model
Noise reduction is performed by statistically evaluating X-ray-derived noise and circuit system noise.

SynergyDrive

Examination time is greatly reduced by optimizing the workflow during scanning.
The operator's workflow has been improved by shortening time-consuming procedures.

  1. Patient positioning
  2. Patient registration
  3. Scanogram
  4. Scanning
  5. Exit
  6. Postprocessing

Simultaneous presetting and image processing for multiple patients

The operator is required to perform various tasks in scanning and image processing.
"Study Tab" allows you to switch worksheets for up to 3 patients simultaneously, like flipping pages.
"Navigation Tab" allows you to freely move from scanning to image processing within the same worksheet. Tab switching contributes to a stress-free operator environment.

  1. Study Tab:"Study Tab"allows easy switching through each patient worksheet.
  2. Navigation Tab:"Navigation Tab" allows easy switching between imaging and image processing of the same patient.
  3. Scanning
  4. Exit
  5. Image processing

Lateral slide table function for easy positioning 

Since the patient table moves laterally up to 200mm (+/-100mm), off-set regions such as the heart and shoulders can be easily positioned at the center of the FOV, improving examination efficiency. 

Positioning of the heart around the center of the FOV

Positioning of the extremities around the center of the FOV

  • * Images and processing performed by SCENARIA CT system.

Aperture 800mm
800mm wide gantry aperture and smooth shape of the gantry opening enable easy access to the patient.

AutoPose (Automatic scan range setting)

Improved reproducibility and reduced set up time.

SCENARIA View can automatically set the scanning range using the scanogram image. The operator can adjust the range manually, if necessary. AutoPose supports several reference  lines setting, such as OM Line (Orbitomeatal base line), SM Line (Superior orbitomeatal line) and RB Line (Reid’s base line), for head scanning. Additionally, since the limits can be set in advance, the scan range can be customized according to the preference of the facility.

Head

OM Line

SM Line

RB Line

Chest

Red:Automatically positioned area
Blue:Automatically positioned area + Margin setting area