In order to provide you with a better browsing experience and to improve our site functionality, we use cookies and other tracking technologies. Detailed information on the use of cookies on our site and how to opt out is provided in our Cookie Policy. By clicking into any content on this site, you consent that we can store and access cookies and other tracking technologies as described in our Cookie Policy.
Indonesia
Home Consumer instax™ instax™ smartphone printers instax mini Link+™ instax mini Link+™ Specifications
[photo] Front view of the instax mini Link+™

instax mini Link+™ - Specifications

NEW
Special Site Support
Front
[photo] Front view of the instax mini Link+™
  1. Strap Eyelet
  2. Power Button
  3. Function Button
  4. LED
  5. Film Ejection Slot
Side
[photo] Side view of the instax mini Link+™
  1. USB Type C port
  2. Reset button*1
  3. USB Type C Port Cover
Rear
[photo] Image of the back of the instax mini Link+™
  1. Film Door Lock
  2. Film Door*2
  • *1 If the printer does not work properly, press the Reset button to reset the printer.
  • *2 Printer uses instax™ mini instant film only (film sold separately).
Specifications
Recording method

3-color exposure with OLED

Film used

FUJIFILM instax™ mini instant film (sold separately)

Image size

2.4 in × 1.8 in / 62 mm × 46 mm

Exposure pixel count

800 × 600 dots

Exposure resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Exposure gradation

RGB gradation of 256 colors

Interface

Bluetooth® Ver. 5.1

Printable image format

JPEG, PNG, HEIF, DNG

Print transmission time

Approximately 15 seconds for transmission and to start printing.

  • * An additional second is added when printing in Design Print mode.
Possible number of printed images

Approximately 100 (from full charge; number of prints depends on the usage conditions.)

Power supply

Lithium-ion battery (internal type)

Charging time

Approximately 1.5 to 2 hours (depending upon environment temperature at time of charging)

Power consumption

Approximately 3 W

Operating environment

Temperature: +41 °F to +104 °F (+5 °C to +40 °C)
Humidity: 20% to 80% (no condensation)

Main unit dimensions

3.41 in. × 1.31 in. × 5.04 in. (86.7 mm × 33.4 mm × 128.0 mm) excluding projecting parts

Main unit weight

0.53 lbs (240 g) (excluding film cartridge)

Supplied accessory

USB Type-C cable (FZ00013220)
Length: 11.81 in. (30 cm)

  • The above specifications are subject to change for performance improvement.
Special Site
Support