The FUJIFILM UNIGRAPHICA TransJet Transport has a scalable, modular configuration that supports monochrome and color, simplex and duplex digital printing with a wide variety of options. It can support up to 10 colors, including specialty inks.
| Parameter | FUJIFILM TransJet Roll-to-Roll | ||||
|---|---|---|---|---|---|
| TJ R S 520 | TJ R D 520 | TJ R S 1040 | TJ R D 1040 | ||
| Simplex/Duplex | Simplex | Duplex | Simplex | Duplex | |
| Web width max | 20.4" (520 mm)/ 41.9" (1040 mm) |
20.4" (520 mm) | 20.4" (520 mm) | 41.9" (1040 mm) | 41.9" (1040 mm) |
| Web width min | 4.7" (120 mm) | X | X | X | X |
| Speed | 65.8 fpm / 20 mpm - 656 fpm / 200 mpm*1 | X | X | X | X |
| Web tension adjustable range [N] | up to 300 N | X | X | X | X |
| Web break sensors | X | X | X | X | |
| Encoders | 65,546 pulses per revolution | X | X | X | X |
| Touch screen panel w/ symbol control [inches] | 7” monitor | X | X | X | X |
| Servo drives, PLC, controller | Beckhoff | X | X | X | X |
| System prepared to accomodate | inkjet system | X | X | X | X |
| dryer | X | X | X | X | |
| camera | X | X | X | X | |
| other | X | X | X | X | |
| Control cabinet with connection | 1 x 400V – 20A – 50/60HZ | X | X | X | X |
| Certification | CE | X | X | X | X |
| Compressed air requirements | to be provided by customer (6.5 bar / 15NL) | X | X | X | X |
| Parameter | FUJIFILM TransJet Sheet-to-Sheet | |
|---|---|---|
| TJ STS S 520 | TJ STS S 1040 | |
| Stacker*2 | - Frame with pile lift for up to 2.0kN load. Stacker designer for hand loading. Loading cart available optionally - Side and front jogger - End stop - Sheet brake and sheet forming device |
- Frame with pile lift for up to 10.0 / 20.0 kN load. Stacker designed for pallet operation. Unloading via pile jack. - Side and front jogger - End stop - Sheet brake and sheet forming device |
| Transmitted light unit (optional) | For light assembly, mounted from underneath the belt of the vacuum-belt-table | |
| Additional reject gate (optional) | - Standard configuration with 1 reject gate - Up to 15 reject gates possible (16 destinations in total) - Each additional gate expands the length of the system by 640mm |
|
| Loading cart | For preloading feeder piles and rapid unloading of stacker piles | |
| Sheet width | 8.2" / 210 mm - 21.6" / 550 mm | 11.8" / 300 mm - 40.9" / 1040 mm |
| Sheet length | 8.2" / 210 mm -29.5” / 750 mm | 11.8" / 300 mm - 40.9" / 1040 mm |
| Material thickness | 0.002" (0.07mm) - 0.19" (0.5mm) (flexible material - thicker substrates such as corrugated material and metal plates are also possible, depending on the application) | |
| Web weave (how much the stack can be uneven in 1 meter). | <0.19” / 5mm | |
| Material weight (when using suction wheel) | 0.13 lb. (60 grams) - 0.55 lb. (250 grams) | |
| Material weight (when using suction belt) | 0.22 lb. (100 grams) - 0.88 lb. (400 grams) | |
| Working height | 39.3" (1000 mm) | 49.2" (1250 mm) / 57.0" (1450 mm) / 68.8" (1750 mm) |
| Max. pile load [kN] | 2 | 10/20 |
| Speed | 65.6 ft/m (20 m/m) - 524.9 ft/m (160 m/m) (standard)*3 | 65.6 ft/m (20 m/m) - 590.9 ft/m (180 m/m) (standard)*3 |
| Performance [sheets/hr] | Up to 1,000*4 | |
| Voltage (standard) | 400V - 50/60 Hz - 3 Ph - (N) - PE (standard) or 220V - 50/60 HZ - 3 Ph - PE |
|
| Power consumption [kW] | ~6 (standard) *4 | ~8 (standard) *4 |
- *1 Capabilities may vary depending on application and substrate
- *2 With the TJ STS S500, either a delivery conveyor or a stacker is applicable, depending upon customer specification/application
- *3 Actual max pile load depends upon substrate
- *4 Performance is dependent upon application (i.e., quantity of reject gates, length of belt, substrate, etc.)
