In order to provide you with a better browsing experience and to improve our site functionality, we use cookies and other tracking technologies. Detailed information on the use of cookies on our site and how to opt out is provided in our Cookie Policy. By clicking into any content on this site, you consent that we can store and access cookies and other tracking technologies as described in our Cookie Policy.

Malaysia

Digital Minilab

Frontier LP9700

NEW

A silver halide minilab specially designed for both high-speed performance and high quality photo print.

Main Specifications

Processing capacity  Print sizes Paper Widths Printing speed
89 × 127 mm (3.5" × 5") 127 mm (5”) Approx. 2,250 prints/hr
102 x 152 mm (4" × 6") 152 mm (6”) Approx. 2,120 prints/hr
305 x 457 mm (12" × 18") 305 mm (12") Approx. 290 prints/hr
Print sizes 82.5 mm (3.2") × 82.5 mm (3.2") - 305 mm (12") × 914.4 mm (36")
Processing chemicals Chemical system CP-49E
Footprint space Approx. 1.4 m2 (Dual magazine, with 152 mm print sorter attached)

Laser Printer / Paper Processor

Type

Floor-type, normal light operation (laser printer, processor, cutter and sorter in one unit)

Exposure system

Scanning exposure system using RGB lasers

Paper magazines

Dual magazine system (standard) / Triple magazine system (factory option) / Quad magazine system (factory option) 

Paper

FUJICOLOR Paper (silver-halide)

Paper widths

82.5 / 89 / 102 / 114 / 117 / 120 / 127 / 130 / 152 / 165 / 178 / 203 / 210 / 216 / 240 / 254 / 279 / 305 mm 
(3.2" / 3.5" / 4" / 4.5" / 4.6" / 4.7" / 5" / 5.1" / 6" / 6.5" / 7", 8" / 8.3" / 8.5" / 9.4" / 10" / 11" / 12") 

Back printing

Two lines of 14-120 characters for backside printing of information

Printer sorter

17 orders:Supports 152 mm (6" ) width (50 prints of 152 x 102 mm (6" × 4") / tray)
Supports order interrupt signal lamp*1

14 orders:Supports 152 mm (6" ) width (82 prints of 152 x 102 mm (6" × 4") / tray)
Supports order interrupt signal lamp*1

8 orders:Supports 254 mm (10") width
Does not support order interrupt signal lamp*1

Printer condition setup

Semi-automatic calibration by built-in calibrator

Processing time

Dry-to-dry: 1 min. 42 sec.

Power requirements

AC 200-240V 1 P2W or 3P3W / AC 346-415V 3P4W 

Dimensions

[Dual magazine, with 152 mm print sorter attached]  1,660 (W) × 953 (D) × 1,375 (H) mm

Weights*1

Printer:Approx. 281.5 kg (620.6 lbs)
Processor:Approx. 323.2 kg (712.5 lbs)
Total:Approx. 604.7 kg (1,333.1 lbs)

  • *1 Options, magazines, papers, and chemicals are not included. (With 152 mm print sorter attached.) 

Dimensions

With 152 mm print sorter attached