Front
- Flash
- Self timer lamp / Charging lamp
- Shutter button
- Selfie mirror
- Lens
- Power switch
- Effect reset button
- Accessory shoe
- Lens dial
- Film dial
- Strap hook
- Tripod hole
Side
- Film ejection slot
Rear
- Film door
- Film door lock
- LCD Screen
- Select buttons
- MENU / OK button
- (Back) button
- (Playback) button
- (Function) button
- Print lever
Specifications
Camera Function
-
Image sensor
-
1/5-inch CMOS with primary color filter
-
Number of recorded pixels
-
2560 x 1920
-
Storage media
-
Internal memory, microSD / microSDHC memory card
-
Storage capacity
-
Approximately 45 images in internal memory, approximately 850 images per 1 GB in microSD / microSDHC memory card
-
Recording method
-
DCF compliant Exif Ver 2.3
-
Focus distance
-
f = 28 mm (35-mm film equivalent)
-
Aperture
-
F2.0
-
Auto focus
-
Single AF (with AF Illuminator)
-
Shooting distance
-
10 cm to ∞
-
Shutter speed
-
1/4 second to 1/8000 second (automatic switching)
-
Shooting sensitivity
-
ISO100 to 1600 (automatic switching)
-
Exposure control
-
Program AE
-
Exposure compensation
-
−2.0 EV to +2.0 EV (1/3 EV step)
-
Metering method
-
TTL 256 split metering, multi metering
-
White balance
-
Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent
-
Flash
-
Auto flash / Forced flash / Suppressed flash
Shooting range with flash: Approximately 50 cm to 1.5 m -
Self-timer
-
Approximately 2 seconds / approximately 10 seconds
-
Image effects
-
10 lens effects, 10 film effects
Total of 100 effects by multiplying above
Print function
-
Exposure pixel count
-
1600 x 600 dots (800 x 600 dots when printed from smartphone app)
-
Exposure resolution
-
25 dots / mm x 12.5 dots / mm (635 x 318 dpi, 40 x 80 μm dot pitch)
12.5 dots / mm when printed from smartphone app (318 dpi, 80 μm dot pitch) -
Interface
-
Standard compliance: Bluetooth Ver. 4.2 (BLE)
-
Exposure gradation
-
RGB gradation of 256 colors
-
Printable image format
-
JPEG images taken with this unit
-
Print output time
-
Approximately 16 seconds
- * Plus 7 seconds when printed using instax-Rich Mode immediately after startup.
-
Print function
-
Images in the internal memory and images in the memory card can be printed
-
Reprint
-
Reprint is possible for images stored in print history (up to 50)
Other
-
Smartphone app linked functions
-
Smartphone image print function, remote shooting function, printed image transfer function, firmware upgrade function
-
LCD screen
-
3.0-inch TFT color LCD screen
Pixel count: Approximately 460,000 dots -
External interface
-
Micro USB Micro-B (for charging only)
-
Power supply
-
Lithium ion battery (internal type: not removable)
-
Charging function
-
Built-in
-
Possible number of printed images
-
Approximately 100 (from full charge)
- * The number of prints depends on the usage conditions.
-
Charging time
-
Approximately 2 to 3 hours
- * Charging time depends on the temperature.
-
Main unit dimensions
-
87 mm x 122.9 mm x 36 mm (excluding projecting parts)
-
Main unit weight
-
Approximately 285 g
-
Operating environment
-
Temperature: 5ºC to 40ºC
Humidity: 20% to 80% (no condensation) -
Film used
-
FUJIFILM instant film "instax mini" (sold separately)
- Specifications above are subject to change for improvement.
- The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.