Singapore

SUPERIA Thermal CTP Plates

NEW

The Superia low chemistry range enables you to benefit from the industry's lowest chemistry, water and processor maintenance figures.

  SUPERIA LH-PJ2 SUPERIA LH-PK
Print application Commercial, UV printing and web offset Commercial, UV printing and web offset
Laser type Thermal LD 830 nm (800 - 850 nm) Thermal LD 830 nm (800-850 nm)
Technology Processed Processed
Sensitivity 100 - 120 mJ/cm2 100-130 mJ/cm2 (varies with plate setter type)
Resolution 200 lpi (1 - 99%) 175 lpi (1-99%)
FM screen compatible Yes, FM10 (device-dependent) FM25 acceptable, but not recommended
Gauges 0.15, 0.20, 0.30 and 0.40 mm -
Safelight White: 1 hour; UV-cut: 2 hours; yellow: 12 hrs White lamp: 1hour; UV filtered lamp: 2 hours;
Yellow lamp: 12 hours
Shelf life 2 years 2 years
Developer / Replenisher FUJIFILM LH-D2WS / LH-D2RWS FUJIFILM LH-D2WS / LH-D2RWS
Bath life** 3 months or 8,000 m2 (FLH-Z processor) 3 months or 12,000 m2 (FLH-Z processor)
Gum FUJIFILM FN-6 FUJIFILM FN-6S
Run length* (unbaked) 200,000 50,000
Run length* (baked) 240,000 100,000
UV-ink characteristics* (unbaked)     100,000 35,000 – 50,000
UV-ink characteristics *(baked) 120,000 50,000 – 75,000

*Run lengths are always dependent on press conditions
**Dependent on good processor maintenance and environment