Slovakia
Mini 4300 Series Industrial Inkjet Printbar System

Mini 4300 Series Industrial Inkjet Printbar System

Optional Accessories

Head Mount

The Mini 4300 Head Mount is designed to provide an integration solution between the printbar and a transport system, while providing 5 axes of adjustment for high image quality results.

Material

Stainless steel, aluminum

Weight

Approximately 11 kg [25 lbs.]

Mounting holes

M8 x 1.25 thread, 25.4 x 25.4 square hole pattern

Yaw adjustment

± 3 degrees

Roll adjustment

± 2.5 degrees

Pitch adjustment

± 2 degrees

Standoff adjustment

19 mm [0.75 in.]

Horizontal coarse adjustment

320 mm [12.6 in.] max

Horizontal fine adjustment

9 mm [ 0.35 in.]

LED Lamp

The LED lamp is used for UV/LED curable inks. Results may vary.

Size

77 x 90 x 231.3 mm [3 x 3.5 x 9 in.]

Weight

1.82 kg [2.2 lbs.]

Standoff distance

2 mm [0.08 in.]

Noise

54dbA @ 1 m [3.3 ft.]

Max operating temp

35°C [ 95°F]

Input power

120V

Input signal

Analogue or RS485

Aqueous Dryer

The Aqueous dryer is used for aqueous inks, organic solvents and latex. Results may vary.

Lamp size

362/508 x 22/67 x 237 mm [14.2/20 x 0.9/2.6 x 9.3 in.]

Drying width

44 mm [1.7 in.]

Lamp weight

1.7 kg [3.7 lbs.]

Lamp power

Up to 3.1kW emitter

PSU input power

230VAC, 14A, 50/60 Hz*

PSU weight

2 kg [4.4 lbs.]

PSU size

128 x 250 x 60 mm [5 x 9.8 x 2.4 in.]

Mount height adjustment

60 mm [2.4 in.]

Mount flip-up angle

45° and 90°

Mounting holes

M8, 100 mm [3.9 in.] width

Size

1092.2 x 457.2 x 508 mm [43 x 18 x 20 in.]

Weight

113.4 KG [250 lbs.]

Max substrate roll diameter

304.8 mm [12 in.]

Max substrate roll width

152.4 mm [6 in.]

Substrate roll core diameter

76.2 mm [3 in.]

Core locking

Manual

Speed

10.7 – 152.4 meters per minute [35 – 500 feet per minute]

Unit control

Manual through local HMI touch screen

Auto tension control

Yes

Tension control method

Pneumatic brake

Substrate break detection

Yes

End of substrate notification

Yes

E-stop

Yes

Encoder mounting bracket

Yes

Mounting plate

M8 x 1.25 thread, 25.4 x 25.4 mm square pattern

Substrate elevation

Even with top mounting plate

Input power

230 VAC, Single phase, 50/60 Hz