This website uses cookies. By using the site you are agreeing to our Privacy Policy.

South Korea
Home Business Optical Devices Projector Projector FP-Z8000/FP-Z6000 Projector FP-Z8000/FP-Z6000 : Support
[photo] Fujifilm Z Projector FP-Z8000

Projector FP-Z8000/FP-Z6000 - Support

NEW

A lightweight and compact ultra-short throw projector offering flexibility in installation and blending seamlessly into any space.

Spec Sheet Manual FP-Z8000/FP-Z6000
Operation manual (HTML)

You can see the operation manual.

[video] Operation Manual for FP-Z8000 projector
Operation manual (PDF)

You can download the operation manual.

Cover of detailed instruction manual
Basic manual (PDF)

You can download the basic manual.

[PDF] Operation Manual for FP-Z8000 projector
Software
Warping and Blending Tool and the USB drive Ver1.16 (FP-Z8000)

For the operation of the "Warping and Blending Tool and the USB driver Ver1.16", please refer to the description in the Operation manual of Z8000/Z6000.

This software is compatible with only FP-Z8000.

ZIP: 10.5MB

Using the Warping and Blending Tool-Blending (Edge Blending)
Using the Warping and Blending Tool-Warping (Geometric Correction)
  • * It is not supported for FP-Z6000 and FP-Z5000.
  • * Please extract the downloaded zip-file and install the software (Warping and Blending Tool 1_1.16.exe).
  • * Please also be sure to install the driver (CDM21224_Setup.exe) included in the zip-file so that your PC can recognize FP-Z8000.
FUJIFILM PROJECTOR CONTROLER ver1.0.5

ZIP: 289KB

This software is to control the projector via a network.

Display screen when operating software.

When using this software with the FP-Z8000, it is compatible with firmware version 1.06 or later. The FP-Z6000 is compatible with all versions.

  • * The FP-Z5000 is not compatible.
FUJIFILM PROJECTOR MANAGEMENT TOOL ver1.1

This application enables network monitoring of the operating status of Z projectors in real time.
Registration of up to 255*1 Z projectors on the network and centralized management from a single PC via the network is possible.

  • * Not guaranteed to work in all network settings.
  • *1 Depends on PC and network conditions.

ZIP: 11.0MB

When using this software with the FP-Z8000/FP-Z6000, the firmware version should be 2.00 or later.
To use this software, you must install “FUJIFILM PROJECTOR CONTROLER” beforehand.

  • * The FP-Z5000 is not compatible.
Manual

For specific installation instructions of FUJIFILM PROJECTOR MANAGEMENT TOOL, refer to the following manual (PDF) .