FCR PRIMA T
NEWA table-top reader unit with speedy processing and high resolution.
The content on this page is intended to healthcare professionals and equivalents.
-
Standard Components
-
FCR PRIMA T Image Reader (Model: CR-IR 392)
AC power cord
-
Other System Components
-
Imaging Plate ST-VI:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)IP Cassette Type CC:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation) -
Time Required for IP Feed/Load
-
Min. 64 sec. (Min. 54 sec.)*1
-
Processing Capacity
-
Up to 57 IPs/ hr. (Up to 67 IPs/hr.)*1
-
Reading Specification
-
10 pixels /mm, 5 pixels/mm*2
-
Time to Start on Display
-
Min. 33 sec.
-
Time to Print on DRYPIX PRIMA
-
Approx. 165 sec. (Approx. 155 sec.)*2 in case of 35×43cm
-
Number of Stacker
-
1
-
Network
-
10 Base T/100 Base TX
-
Dimensions (W×D×H)
-
560×540×392mm (22”×21”×15”)
-
Weight
-
39kg (86lbs.)
-
Power Supply Conditions
-
Single phase 50-60Hz
AC120-240V ±10% 1.9A (max)
-
Environmental Conditions
-
Operating Conditions:
- Temperature: 15-30C
- Humidity: 15-80%RH (No dew condensation)
- Atmospheric pressure: 750-1060hPa
This equipment is a Class 1 laser product (IEC60825).
- *1 When using the Upgrade Kit
- *2 When using the Upgrade Kit and in the High Speed mode