New Zealand

SUPERIA Processor

NEW

We provide an extensive range of plate processors, all designed to minimise chemistry consumption and maintenance

FCF-V

NEW

The FCF-V Series perfectly complements Fujifilm’s Superia PRO-V low chemistry plate. It is easy to clean and maintain, with an incredibly small footprint, resulting in a simple solution that has clear environmental benefits.

FCF V Series at a glance:

  • Environmentally friendly and simple processing

  • Easier maintenance of finishing unit (only one bath)

  • Less waste produced

  • Smaller footprint due to a shorter finishing unit

  • No need for replenishment

  FCF 85V FCF 125V

Plate types

Superia PRO-V

Maximum plate width

850 mm

1250 mm

Minimum plate length

274 mm

285 mm

Plate gauge

0.15 - 0.3 mm

Processing time

dip to nip, 19 seconds

Tank capacity

23 litres

85 litres

Dimensions (W x D x H)*

1255 x 1300 x (1010 - 1100) mm

1720 x 1660 x (1160 - 1310) mm

FLH-Z

NEW

The award-winning* FLH-Z Series of plate processors is designed for use with Fujifilm's low chemistry range of thermal CTP plates.  Each processor in the range incorporates Fujifilm's unique intelligent 'ZAC' microprocessor control system which helps achieve consistent, high quality plate production with minimal chemistry usage and maintenance.

FLH-Z Series at a glance:

  • Full bath of developer can now develop up to 15,000m2 of plates resulting in substantial savings in developer consumption.

  • Maintaining perfect developer activity allows the developer bath life to be greatly extended beyond the norm for developing systems.

  • Typically can achieve bath life figures four or more times greater than normal plate processing systems.

  • The chemistry used for processing plates in a ‘ZAC’ system is a nonsilicate-based recipe. This makes a much longer bath life possible without the increase in developer sludge and filter blockages.

  • Because of the way ‘ZAC’ processors intelligently control replenisher delivery, they are more stable making it much easier to achieve high quality, irrespective of changes to environmental conditions.

Key specifications

FLH-Z 85

FLH-Z 125

FLH-Z 150

FLH-Z 165

Plate types Superia

LH-PJE, LH-PLE & LH-PXE thermal plates,and LH-PCE (without ‘ZAC’ benefits)

Maximum plate width

850 mm

1250 mm

1500 mm

1650 mm

Minimum plate length

240 mm

310 mm

310 mm

310 mm

Plate gauge

0.15 – 0.4 mm

Processing time

LH-PJE and LH-PLE: 16 seconds, LH-PXE: 14 seconds

Develop tank capacity

27 litres

76.5 litres

92.5 litres

100 litres

Dimensions (W x D x H)*

1525 x 1070 x 1085 mm

1950 x 1410 x 1148 mm

2250 x 1410 x 1148 mm

2400 x 1410 x 1148 mm

 

FLC-V Series

NEW

The Fujifilm FLC-V Series is a range of compact CTP finishing units compatible with Superia PRO-V, Fujifilm’s leading low-chemistry plate. The finishing units are specifically designed to optimise plate production, with minimal environmental impact. Used in conjunction with Superia PRO-V, the FLC-V Series eliminates water rinsing, reduces chemical usage and waste, and improves the overall environmental footprint of plate production.

FLC-V Series at a glance:

  • Elimination of water rinsing

  • No chemical replenishment

  • Simple one bath operation

  • Low cost of ownership

  • Small footprint

 

FLC-V85M

FLC-V85H

FLC-V125H

Plate types

Superia PRO-V

Maximum plate width

850 mm

850 mm

1250 mm

Minimum plate length

252 mm

290 mm

290 mm

Plate gauge

0.15 - 0.3 mm

Processing time

dip to nip, 19 seconds

Develop tank capacity

35 litres

44 litres

84 litres

Dimensions (W x D x H)*

1223 x 1295 x 1063 mm

1446 x 1403 x1115 mm

1860 x 1403 x1115 mm