FUJIFILM UNIGRAPHICA TransJet Transport System: Specification

Specifications

The FUJIFILM UNIGRAPHICA TransJet Transport has a scalable, modular configuration that supports monochrome and color, simplex and duplex digital printing with a wide variety of options. It can support up to 10 colors, including specialty inks.

Parameter		FUJIFILM TransJet Roll-to-Roll
Parameter		TJ R S 520	TJ R D 520	TJ R S 1040	TJ R D 1040
Simplex/Duplex		Simplex	Duplex	Simplex	Duplex
Web width max	20.4" (520 mm)/ 41.9" (1040 mm)	20.4" (520 mm)	20.4" (520 mm)	41.9" (1040 mm)	41.9" (1040 mm)
Web width min	4.7" (120 mm)	X	X	X	X
Speed	65.8 fpm / 20 mpm - 656 fpm / 200 mpm^*1	X	X	X	X
Web tension adjustable range [N]	up to 300 N	X	X	X	X
Web break sensors		X	X	X	X
Encoders	65,546 pulses per revolution	X	X	X	X
Touch screen panel w/ symbol control [inches]	7” monitor	X	X	X	X
Servo drives, PLC, controller	Beckhoff	X	X	X	X
System prepared to accomodate	inkjet system	X	X	X	X
	dryer	X	X	X	X
	camera	X	X	X	X
	other	X	X	X	X
Control cabinet with connection	1 x 400V – 20A – 50/60HZ	X	X	X	X
Certification	CE	X	X	X	X
Compressed air requirements	to be provided by customer (6.5 bar / 15NL)	X	X	X	X

Parameter	FUJIFILM TransJet Sheet-to-Sheet
Parameter	TJ STS S 520	TJ STS S 1040
Stacker^*2	- Frame with pile lift for up to 2.0kN load. Stacker designer for hand loading. Loading cart available optionally - Side and front jogger - End stop - Sheet brake and sheet forming device	- Frame with pile lift for up to 10.0 / 20.0 kN load. Stacker designed for pallet operation. Unloading via pile jack. - Side and front jogger - End stop - Sheet brake and sheet forming device
Transmitted light unit (optional)	For light assembly, mounted from underneath the belt of the vacuum-belt-table
Additional reject gate (optional)	- Standard configuration with 1 reject gate - Up to 15 reject gates possible (16 destinations in total) - Each additional gate expands the length of the system by 640mm
Loading cart	For preloading feeder piles and rapid unloading of stacker piles
Sheet width	8.2" / 210 mm - 21.6" / 550 mm	11.8" / 300 mm - 40.9" / 1040 mm
Sheet length	8.2" / 210 mm -29.5” / 750 mm	11.8" / 300 mm - 40.9" / 1040 mm
Material thickness	0.002" (0.07mm) - 0.19" (0.5mm) (flexible material - thicker substrates such as corrugated material and metal plates are also possible, depending on the application)
Web weave (how much the stack can be uneven in 1 meter).	<0.19” / 5mm
Material weight (when using suction wheel)	0.13 lb. (60 grams) - 0.55 lb. (250 grams)
Material weight (when using suction belt)	0.22 lb. (100 grams) - 0.88 lb. (400 grams)
Working height	39.3" (1000 mm)	49.2" (1250 mm) / 57.0" (1450 mm) / 68.8" (1750 mm)
Max. pile load [kN]	2	10/20
Speed	65.6 ft/m (20 m/m) - 524.9 ft/m (160 m/m) (standard)^*3	65.6 ft/m (20 m/m) - 590.9 ft/m (180 m/m) (standard)^*3
Performance [sheets/hr]	Up to 1,000^*4
Voltage (standard)	400V - 50/60 Hz - 3 Ph - (N) - PE (standard) or 220V - 50/60 HZ - 3 Ph - PE
Power consumption [kW]	~6 (standard) ^*4	~8 (standard) ^*4

*1 Capabilities may vary depending on application and substrate
*2 With the TJ STS S500, either a delivery conveyor or a stacker is applicable, depending upon customer specification/application
*3 Actual max pile load depends upon substrate
*4 Performance is dependent upon application (i.e., quantity of reject gates, length of belt, substrate, etc.)

FUJIFILM UNIGRAPHICA TransJet Transport System - Specifications

Related Products