In order to provide you with a better browsing experience and to improve our site functionality, we use cookies and other tracking technologies. Detailed information on the use of cookies on our site and how to opt out is provided in our Cookie Policy. By clicking into any content on this site, you consent that we can store and access cookies and other tracking technologies as described in our Cookie Policy.

New Zealand

FCR PRIMA T

A table-top reader unit with speedy processing and high resolution.

The content on this page is intended to healthcare professionals and equivalents.

Standard Components

FCR PRIMA T Image Reader (Model: CR-IR 392)

AC power cord

Other System Components

Imaging Plate ST-VI:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)

IP Cassette Type CC:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)

Time Required for IP Feed/Load

Min. 64 sec. (Min. 54 sec.)*1

Processing Capacity

Up to 57 IPs/ hr. (Up to 67 IPs/hr.)*1

Reading Specification

10 pixels /mm, 5 pixels/mm*2

Time to Start on Display

Min. 33 sec.

Time to Print on DRYPIX PRIMA

Approx. 165 sec. (Approx. 155 sec.)*2 in case of 35×43cm

Number of Stacker

1

Network

10 Base T/100 Base TX

Dimensions (W×D×H)

560×540×392mm (22”×21”×15”)

Weight

39kg (86lbs.)

Power Supply Conditions

Single phase 50-60Hz

AC120-240V ±10% 1.9A (max)

Environmental Conditions

Operating Conditions:

  • Temperature: 15-30C
  • Humidity: 15-80%RH (No dew condensation)
  • Atmospheric pressure: 750-1060hPa

This equipment is a Class 1 laser product (IEC60825).

  • *1 When using the Upgrade Kit
  • *2 When using the Upgrade Kit and in the High Speed mode