This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Venezuela

SUPERIA Processless Thermal CTP Plates

NEW

Superia ZP: 
High-performance processless CTP plate

Fujifilm’s high-performance Superia ZP plate is designed to give you the quality and simplicity you need to maximise efficiency in your offset printing process. Built using advanced layering technology, it delivers excellent results and boasts impressive environmental credentials

Quality you can rely on

Because Superia ZP doesn’t require any processing or finishing using chemistry or gum, the stability and consistency of output is better than a traditionally processed plate. And with a resolution of 1-99% and 20 μm FM screening – you can rely on high-quality prints, time and time again.

A simpler way to make plates

Processless plate production represents the simplest way to make plates. Once the plate has been imaged in a platesetter, you can mount it directly on the press.
There’s no need for a processor, and its associated chemistry. And you’ll save on energy required to power the processor, along with water and waste from plate production.

Advanced layering technology

The Superia ZP incorporates MULTIGRAIN V and Rapid Stable Start-up technology along with advanced layering technology unique to Fujifilm. Combined, these ensure optimum plate stability, a long shelf life, high sensitivity and productivity.

Better for the environment

By eliminating the chemicals of traditional plate processing, and reducing power requirements, waste and water use, processless plates have a much smaller carbon footprint. Which means, by using Superia ZP over a traditional plate process, you’ll impact the environment less.

Technical specification

Print application

commercial

Laser type

thermal LD 830 nm (800 - 850 nm)

Technology

non-ablative, processless

Sensitivity

120 mJ/cm2

Resolution

200 lpi (1-99%)

FM screen compatible

yes – FM20

Gauges

0.15, 0.20, 0.30, 0.40 mm

Safelight

white light handling

Latent image

up to 1 week

Contrast

acceptable after exposure

Developer / replenisher

N/A

Bath life

N/A

Gum

N/A

Run length*1 unbaked

up to 100,000

Run length*1 baked

not practical

Run length*1 UV ink unbaked

not recommended

Run length*1 UV ink baked

not practical

  • *1 Run lengths are always dependent on laser power and press conditions