In order to provide you with a better browsing experience and to improve our site functionality, we use cookies and other tracking technologies. Detailed information on the use of cookies on our site and how to opt out is provided in our Cookie Policy. By clicking into any content on this site, you consent that we can store and access cookies and other tracking technologies as described in our Cookie Policy.


FDR Visionary Suite


A flagship X-ray system providing advanced applications for diagnosis.

The content on this page is intended to healthcare professionals and equivalents.

Benefiting from a wide range of advanced applications targeted to improve diagnostic capabilities, a precise design that facilitates efficient workflow with minimal impact for patients and FUJIFILM's unique image processing that enhances image quality while reducing the patient dose, the FDR Visionary Suite is the next generation in X-ray systems.

  • Compatible with a range of FUJIFILM DR panels
  • Advanced applications support diagnosis
    [Tomosynthesis] [Energy Subtraction] [Long View Imaging]
  • Stress-free, optimized imaging workflow
    [5-axis Auto-positioning] [Power Assist Function]

Using the latest technological developments to allow further quality improvements with a low operational dose rate.

1. Using Fujifilm’s “ISS method” reading technology to achieve sharper images

In contrast to conventional FPD offerings this system features an indirect conversion FPD using the “ISS method,” where the TFT sensor is placed in front of the scintillation layer instead of behind it. With this proprietary method the scattering/dissipation of X-ray signals is significantly reduced, achieving sharper images with a lower X-ray dose.

Conventional method

ISS method

2. Improved sensitivity in low-density areas using noise reduction circuitry*1

Image noise is reduced by using a proprietary noise reduction circuitry.
Granularity in low-density areas is improved, helping to boost image quality.

  • *1 FDR D-EVO Advanced C43A

3. Image processing technologies producing optimized images

The system features imaging processing technologies that enable desirable image display. These technologies include “Dynamic Visualization,” which optimizes images for diagnosis on-screen, and “Flexible Noise Control (FNC) Processing,” which reduces granularity by automatically extracting and excluding image noise components.

Power Assist function (optional)

The “Power Assist” function minimises effort and strain in manual positioning. The motors in the X-ray tube unit provide variable drive assist depending on the forces applied by the user when moving the tube, reducing the effort needed to position manually and making the workflow more efficient.

Motor drives in each axis depending on the forces

Sensor detects the power applied to the X-ray tube unit

Power Assist level can be selected from 3 modes.
High assist mode provides more assist for more quickly and easier travel over longer distances.

Multiple Panel Combinations and Variations

It is possible to select the optimized imaging method for each examination and site requirement by selecting from a wide range of FUJIFILM panel sizes, types and configurations.

Panel Name/Panel Type FDR D-EVO Advanced C43A FDR D-EVO III C43i FDR D-EVO III C35i FDR D-EVO III G43i FDR D-EVO III G35i FDR D-EVO III C25i
Scintillator CsI CsI  CsI GOS GOS CsI
Size 43×43cm 43×43cm 35×43cm 43×43cm 35×43cm 24×30cm
Applications*2 Tomosynthesis - - - - -
Energy Subtraction - - - - -
Long View Imaging -
Cassette Tray (Free exposure position type)
  • *2 These applications are optional.

Wide Range of Applications That Contribute to Improving Diagnostic Capabilities


Freedom to reconstruct and display image slices

With this technology the X-ray tube moves linearly, acquiring a series of images in a single sweep, which can then be reconstructed to create cross-sectional image slices.

Automatic X-ray dose control and background reconstruction

Using the imaging conditions for a single preliminary image as reference, the conditions for Tomosynthesis imaging are set automatically.

High-precision, high-quality imaging to 150μm

By controlling such items as metal artifacts, high-precision imaging down to 150μm is possible.

Energy Subtraction*3

Separates images of soft tissue and bone for improved viewing

This technology takes two X-rays, utilizing the difference in X-ray energy absorption to create specific images of soft tissue and bone, etc. The dose rate is changed automatically between shots.

Controlling motion artifacts

Motion artifacts that may occur between exposures are suppressed by multiple resolution alignment processing, allowing for clear images of soft tissue and bone.

Image stitching*3

Display full-length images of spine or lower limb

This technology uses multiple images taken in one sweep and automatically stitches them to create images of wide area of up to 160cm upright and 120cm recumbent. Disjointed images caused by patient body movements can be automatically corrected through image alignment.*4

  • *3 These applications are optional.
  • *4 Depending on the degree of disjoint between images it may not be possible to implement automatic image correction.

Smoothly and Surely Ensuring a Stress-free Imaging Environment

1. Preparation

Completion of room preparation without touching the system

The system features an auto-positioning function that moves the X-ray tube into position automatically. It is possible to pre-set and restore positions from the image guidance menu.

  • * Option

Power Assist Function

The Power Assist Function enhances manual X-ray tube positioning by the use of motors, providing quick and extremely light movements. It can reduce the physical exertion for radiographers when positioning the tube.

  • * Option

X-ray stand

A movable scope of 40 to 190 cm from the center of the exposure makes it possible to take images of the entire lower limb from the cervical vertebrae down. The exposure platform can be adjusted from -20 to 90 degrees*5, making it possible to take images of the head and upper limbs.

X-ray table

Using the foot switch and grip switch*5 it is possible to adjust the height quickly and easily between 53 and 85 cm.

  • *5 Option

2. Patient Guidance and Positioning

Easily define the imaging position for each individual patient

With the auto-tracking function the panel and X-ray tube are automatically kept in alignment, making it possible to focus on patient positioning and care. By switching between automatic and manual functions positioning can be simplified, allowing the operator to maintain full control.

Radiation field linking function

The pre-selected radiation field size for the area to be imaged is automatically set and alignment of the field to the upper or lower portion of the detector is also automatically performed.

Setting made easy with an LCD touch panel

The touch panel presents image-related information clearly and also enables settings to be changed easily. It is also possible to change the angle of the square LCD panel by 90 degrees to match the direction of the X-ray tube, making it easy to see at all times.

3. Taking Images

Change conditions in the X-ray room using the touch panel

All conditions can be changed using the LCD touch panel on the X-ray tube supporting arm, making it possible to set conditions in the X-ray room alone. The changed conditions are relayed in real time to the controller outside the X-ray room.

“Sound and light” notifies those away from the machine when an X-ray is being taken

“Ready up” and “X-ray in progress” notifications can be clearly understood by sounds and lights on the frame and hand switch.
There is a choice of seven colors for the notification lights.

Provision of Easy-to-use Advanced Applications

Workflow 1 : Tomosynthesis

Workflow 2 : Image Stitching

  • *6 EX-Mobile does not include the CAD software, so it is necessary to purchase the product designated by FUJIFILM.

D-EVO Advanced Panel for superior workflow and advanced imaging capability

Multifunctional panel with Advanced Applications for imaging flexibility

FDR D-EVO Advanced C43A is a multifunctional portable flat panel sensor that can be used in a wide range of clinical scenarios.
This panel displays excellent performance, allowing for Energy Subtraction and Tomosynthesis imaging. When used as a mobile detector for free- exposure, the D-EVO Advanced displays a flexibility of use not possible with traditional fixed detectors.

Built-in panel charging for hassle free battery management

Built-in panel charging for hassle free battery management

Integrated bucky charging maintains the​ power supply to the D-EVO Advanced panel without the need for regular battery exchange and allows for faster, wired communication for all bucky examinations​.

  • * Some of the functions mentioned on this page are optional. Please contact your local contact window about the details.

Products Name: FDR Visionary Suite
 Manufacturer: Shimadzu Corporation

FDR D-EVO Advanced (model:DR-ID900) is a component of FDR Visionary Suite.
Following items are accessories of FDR D-EVO Advanced.

 Product (s) name Model No.
Battery Pack (Li-ion Battery)
(Note: This product is for DR-ID 900.)
Battery charger (Li-ion)
(Note: This product is for DR-ID 900.)


The instructions for use of "Accessories of FDR D-EVO Advanced" are provided in electronic form by PDF format. Please access the following address and find this product page.