![[photo] Front view of the instax mini Link+™](https://asset.fujifilm.com/www/us/files/2026-01/91e7c3e67f64c13ab4f9525a3d939f1f/pic_mini_link_plus_spec_01.jpg)
- Strap Eyelet
- Power Button
- Function Button
- LED
- Film Ejection Slot
![[photo] Side view of the instax mini Link+™](https://asset.fujifilm.com/www/us/files/2026-01/147eab48ac1a72458711b7cce2423826/pic_mini_link_plus_spec_02.jpg)
- USB Type C port
- Reset button*1
- USB Type C Port Cover
![[photo] Image of the back of the instax mini Link+™](https://asset.fujifilm.com/www/us/files/2026-01/9e5c7da5b2e16eed0b54a8fb747480d8/pic_mini_link_plus_spec_03.jpg)
- Film Door Lock
- Film Door*2
- *1 If the printer does not work properly, press the Reset button to reset the printer.
- *2 Printer uses instax™ mini instant film only (film sold separately).
- Recording method
3-color exposure with OLED
- Film used
FUJIFILM instax™ mini instant film (sold separately)
- Image size
2.4 in × 1.8 in / 62 mm × 46 mm
- Exposure pixel count
800 × 600 dots
- Exposure resolution
12.5 dots/mm (318 dpi, 80 μm dot pitch)
- Exposure gradation
RGB gradation of 256 colors
- Interface
Bluetooth® Ver. 5.1
- Printable image format
JPEG, PNG, HEIF, DNG
- Print transmission time
Approximately 15 seconds for transmission and to start printing.
- * An additional second is added when printing in Design Print mode.
- Possible number of printed images
Approximately 100 (from full charge; number of prints depends on the usage conditions.)
- Power supply
Lithium-ion battery (internal type)
- Charging time
Approximately 1.5 to 2 hours (depending upon environment temperature at time of charging)
- Power consumption
Approximately 3 W
- Operating environment
Temperature: +41 °F to +104 °F (+5 °C to +40 °C)
Humidity: 20% to 80% (no condensation)- Main unit dimensions
3.41 in. × 1.31 in. × 5.04 in. (86.7 mm × 33.4 mm × 128.0 mm) excluding projecting parts
- Main unit weight
0.53 lbs (240 g) (excluding film cartridge)
- Supplied accessory
USB Type-C cable (FZ00013220)
Length: 11.81 in. (30 cm)
- The above specifications are subject to change for performance improvement.