Projector FP-Z5000 NEW Projection Simulator Contact Us Share Close Overview Features Applications Specifications Resources Case Studies Features of Ultra-short throw projection and Wide lens shift function (comparing to an ordinary projector) Before An ordinary projector is set in front of the screen. To display a large screen, an ordinary projector must be away from the screen. An ordinary projector is required to be placed on a stand or suspended with a hoisting accessory. There will be shadows when you stand between an ordinary projector and the screen. You must install an ordinary projector at the same space as the chairs set for participants, especially when it has to be done on the floor. After The projector is unnecessary to be installed in front of the screen. The projector can display a large screen even if it is installed close to the screen. The projector can be directly placed on the floor. Shadows are not often appeared when you stand between the projector and the screen. You can make a presentation standing near the screen. You can save the space for installing the projector and take much space for participants. Features of Ultra-short throw projection and Wide lens shift function ( Friendly usability) Before After Effect of lens rotation#1 Portrait projection (comparing to an ordinary projector) Before The projector must be installed vertically (rotated 90 degrees). The projector must be relocated every time you set it from horizontal installation to vertical installation or the other. Hanging under the ceiling affects the appearance. It is cumbersome for operation and construction. After The portrait projection can be available only by rotating the lens. It is simple to switch the vertical / horizontal displays. It is not easily noticed even being hung under the ceiling. It could be installed easily when the projector is placed on the floor. Effect of lens rotation#2 TOP Projection (comparing to an ordinary projector) Before The projector has to be installed with the lens upwards. It is inconvenient to place the projector in the middle of the room. After Only by rotating the lens can images be projected on the ceiling. The projector can be placed in the corner of the room without affecting the appearance. Effect of lens rotation#3 Floor Projection (comparing to an ordinary projector) Before The projector has to be installed with the lens down. The location of the projector affects the appearance. There will be shadows when you stand on the floor. After Floor projection can be available installing the projector to the ceiling. The location of the projector doesn't affect the appearance. Wide lens shift function makes the shadow difficult to appear even if you stand on the projection image. Effect of lens rotation (various projection possibilities) Advertisement decoration is possible on the entire wall of the exhibition hall. Decorative drawing in the corridor is possible.