Spec Sheet
Manual
FP-ZUH6000
Operation manual (HTML)
You can see the operation manual.
Coming Soon
Operation manual (PDF)
You can download the operation manual.
Coming Soon
Basic manual (PDF)
You can download the basic manual.
Coming Soon
FP-Z8000/FP-Z6000
Operation manual (HTML)
You can see the operation manual.
![[video] Operation Manual for FP-Z8000 projector](https://asset.fujifilm.com/www/us/files/2024-03/6aa6d263230a05f38ca4e93e5481f013/pic_z8000-z6000_manual_01.jpg)
Operation manual (PDF)
You can download the operation manual.

Basic manual (PDF)
You can download the basic manual.
![[PDF] Operation Manual for FP-Z8000 projector](https://asset.fujifilm.com/www/us/files/2024-03/bd037fe9fc1b70ae6b8f83344492c63b/pic_z8000_manual02.jpg)
FP-Z5000
Operation manual (HTML)
You can see the operation manual.
![[video] Operation Manual for FP-Z5000 projector](https://asset.fujifilm.com/www/us/files/2024-03/c89dd29925ace93fe98e49c3052c817c/pic_Projector_03.png)
Operation manual (PDF)
You can download the operation manual.

Basic manual (PDF)
You can download the basic manual.
![[video] Basic Manual for FP-Z5000 projector](https://asset.fujifilm.com/www/us/files/2024-03/e550b48586a84a5098008c4cd4815c34/pic_Projector_02.png)
Software
Warping and Blending Tool for FP-ZUH series
Coming Soon
This software is compatible with only FP-ZUH6000.
Warping and Blending Tool and the USB drive Ver1.16 (FP-Z8000)
For the operation of the "Warping and Blending Tool and the USB driver Ver1.16", please refer to the description in the Operation manual of Z8000/Z6000.
This software is compatible with only FP-Z8000.
ZIP: 10.5MB
Using the Warping and Blending Tool-Blending (Edge Blending)
A video explaining the use of the Warping and Blending Tool - Blending (Edge Blending).
Using the Warping and Blending Tool-Warping (Geometric Correction)
A video explaining the use of the Warping and Blending Tool - Warping (Geometric Correction).
- * It is not supported for FP-Z6000 and FP-Z5000.
- * Please extract the downloaded zip-file and install the software (Warping and Blending Tool 1_1.16.exe).
- * Please also be sure to install the driver (CDM21224_Setup.exe) included in the zip-file so that your PC can recognize FP-Z8000.
FUJIFILM PROJECTOR CONTROLER ver1.0.5
ZIP: 289KB
This software is to control the projector via a network.

When using this software with the FP-Z8000, it is compatible with firmware version 1.06 or later. The FP-Z6000 is compatible with all versions.
- * The FP-Z5000 is not compatible.
FUJIFILM PROJECTOR MANAGEMENT TOOL ver1.0
This application enables network monitoring of the operating status of Z projectors in real time.
Registration of up to 255*1 Z projectors on the network and centralized management from a single PC via the network is possible.
- * Not guaranteed to work in all network settings.
- *1 Depends on PC and network conditions.
ZIP: 12.1MB
This is an introductory video for the FUJIFILM PROJECTOR MANAGEMENT TOOL. This software is an application that allows real-time monitoring of the operational status of Z projectors over the network. It reduces the burden of managing and maintaining operating equipment while supporting stable operation. In the event of a problem, it detects it quickly and visualizes the operating status on a PC at an early stage, reducing the workload of the maintenance personnel. You can register up to 255 Z projectors*1 on the network and manage them centrally from a single PC via the network.* Operation is not guaranteed in all network environments.*1 Depends on the status of the PC and the network.
When using this software with the FP-Z8000/FP-Z6000, the firmware version should be 2.00 or later.
To use this software, you must install “FUJIFILM PROJECTOR CONTROLER” beforehand.
- * The FP-Z5000 is not compatible.
Manual
For specific installation instructions of FUJIFILM PROJECTOR MANAGEMENT TOOL, refer to the following manual (PDF) .