United States
Black MINI LIPLAY Camera

INSTAX® MINI LIPLAY

NEW

Front

Front View of a Black LiPlay camera
  1. Film ejection slot
  2. Lens
  3. Selfie mirror
  4. (Sound) button
  5. Shutter button
  6. Flash/Self timer lamp
  7. Strap hook
  8. USB port

Side

Side View of a Black LiPlay camera
  1. 1 (Shortcut 1) button
  2. 2 (Shortcut 2) button
  3. 3 (Shortcut 3) button
  4. Micro SD card slot
  5. Reset button
  6. (Power) button
  7. Microphone
  8. Speaker

Rear

Rear View of a Black LiPlay camera
  1. Film door lock
  2. (Playback) button
  3. (Print) button
  4. Film door
  5. LCD monitor
  6. Cross key
  7. MENU/OK button
  8. (Back) button

Camera Specifications

Image sensor

1/5-in. CMOS with primary color filter

Effective pixels

2560 x 1920

Storage media

Built-in memory, micro SD / micro SDHC memory card (purchased separately)

Recording capacity

Built-in memory: approx. 45 files, micro SD / micro SDHC memory card: approx. 850 files per 1 gigabyte (without sound)

File system

Compliant with Design rule for Camera File system (DCF), Exif Ver. 2.3

Focal length

28 mm (35-mm film equivalent)

Aperture

F2.0

Auto focus system

Single AF (equipped with AF auxiliary illuminator)

Focus range

10 cm to ∞

Shutter speed

1/4 sec. to 1/8000 sec. (auto)

Sensitivity

ISO 100 to 1600 (auto)

Exposure control

Programmed AE

Exposure compensation

-2.0 EV to +2.0 EV (in increments of 1/3 EV)

Metering

256-segment through the lens (TTL) metering, multi-metering

White balance

Auto

Flash

Auto / Compulsory flash / Suppressed flash
Effective range: approx. 50 cm to 1.5 m

Self timer

Approx. 10 sec. / Approx. 2 sec.

Image effects

frame and filter

Voice recording

Recordable and overwritable during image capture and playback per 1 image

Printer Specifications

Film

FUJIFILM Instant Film INSTAX Mini (purchased separately)

Photo capacity

10 prints per pack

Film size

86 mm x 54 mm

Image size

62 mm x 46 mm

Supported image size

800 x 600 dots

Printing solution

12.5 dots per mm (318 dpi, 80-µm dot pitch)

Printing levels

256 levels per color (RGB)

Supported image format

JPEG images captured with the device

Printing time

Approx. 12 sec. (development time approx. 90 seconds)

Print function

Images on built-in memory / micro SD are printable

Reprint

Reprint up to the last 50 prints
(up to 50 images stored in print history)

Other Specifications

Smartphone app functions

Voice playback from print, smartphone image print, remote image capture, frame addition

LCD monitor

2.7-in. TFT color LCD monitor, Pixels: approx. 230K dots

External interface

Micro USB Micro-B (for charging only)

Power supply

Lithium-ion battery (built-in, cannot be removed)

Charging function

Built-in

Printing capacity

Approx. 100 prints (when battery is fully charged)

  •   * Varies depending on the conditions of use. 
Charging time

Approx. 2 to 3 hrs.

  • * Varies depending on air temperature.
Dimension

82.5 mm x 122.9 mm x 36.7 mm (excluding protrusions)

Weight

Approx. 225 g (excluding film pack and memory card)

Operating environment

Temperature: 5℃ to 40℃
Humidity: 20% to 80% (no condensation)

  • The INSTAX prints depicted are for illustrative purposes only.
  • Specifications above are subject to change for improvement.
  • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG ,Inc. and any use of such marks by FUJIFILM Corporation is under license.
  • The QR code listed in this broucher may not be read depending on the smartphone model.
  • The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.